Fixing the Installation Plate

Before fixing the installation plate to a wall or window frame, you must determine the position of the 65mm( 2 169 inch) hole through which the cable, piping and hose pass to connect the indoor unit up to the outdoor unit. When facing the air conditioner in position on the wall, the piping and cable can be connected from the:

◆Right

◆Left

◆Rear (right or left)

1Determine the position of the pipe and drain hose hole using the right

figure and drill the hole with an inner diameter of 65mm( 2 169 inch) so that it slants slightly downwards.

2	If you are fixing the indoor unit to a...	Then follow Steps...

	Wall	3.

	Window frame	4 to 6.

3Fix the installation plate to the wall in a manner appropriate to the weight of the indoor unit.

➢If you are mounting the plate on a concrete wall with anchor bolts, the anchor bolts must not project by more than 20mm( 34 inch).

4Determine the positions of the wooden uprights to be attached to the window frame.

5Attach the wooden uprights to the window frame in a manner appropriate to the weight of the indoor unit.

6Using tapped screws, attach the installation plate to the wooden uprights, as illustrated in the last figure opposite.

INSTALLING THE INDOOR UNIT

ENGLISH

Unit : mm(inch) Installation plate

		)
		3 16
Pipe Hole		30mm (1
0 65mm (2	9	)
	16

Unit : mm(inch)	)
Unit : mm(inch)	3 8
	(2
	60
252 (10)		275 (11)
		)
		3 16
		(1
		30
90 (3 5 )	140 (5	1 )
8		2

Unit : mm(inch)

)

3 4

~28

1 8

(16

410~730

E-33

AM26B1C13, AM27B1C07, AM27B1C13, UM27B1C3, UM26B1C2 specifications

The Samsung AM27B1C07, UM26B1C2, AM26B1C13, AM27B1C13, and UM18B1C2 are a series of advanced memory devices that underline Samsung's commitment to providing high-performance solutions in the evolving landscape of electronics and computing. These products are characterized by their cutting-edge technologies, reliability, and efficiency, catering to various applications in consumer electronics and industrial use.

One of the main features of these series is their use of Samsung’s state-of-the-art NAND flash technology. This technology is designed to enhance data storage performance while minimizing power consumption, making these devices ideal for portable and battery-operated applications. The devices utilize 3D NAND architecture to increase storage density while ensuring superior durability and speed.

The AM27B1C07 and AM27B1C13 are particularly noted for their high sequential read and write speeds, making them suitable for tasks that require rapid data access, such as gaming and high-definition video processing. These memory solutions support advanced error correction codes (ECC) which ensure data integrity and reliability over time. They have also been optimized for lower latency, enhancing overall system responsiveness.

The UM26B1C2 and UM18B1C2 variants focus on delivering optimized bandwidth, catering well to the demands of modern applications including mobile devices, tablets, and laptops. With integrated power management features, these memory devices help extend battery life while maintaining high-performance levels during peak usage.

All models in this series are built to withstand demanding environments, boasting an extended temperature range that assures stable operation. This feature makes them highly suitable for industrial applications where conditions can fluctuate significantly.

Additionally, Samsung’s commitment to sustainability is evident in these memory solutions. They are designed with energy-efficient processes that not only enhance performance but also reduce the carbon footprint of their production.

Overall, the Samsung AM27B1C07, UM26B1C2, AM26B1C13, AM27B1C13, and UM18B1C2 integrate advanced technologies and features that address the needs of various markets, including consumer electronics, automotive, and industrial sectors. Their blend of high speed, efficiency, and reliability makes them an attractive choice for manufacturers looking to enhance their product offerings with cutting-edge memory solutions.