Heath Zenith 598-1306-02 manual Check Operation and Adjustment, DualBrite Dimmer Control

Page 4

Check Operation and Adjustment

Note: When first turned on or when switching modes wait 30 seconds.

Note: Meets the ENERGY STAR® guidelines when DualBrite® function is off.

Locate the RANGE control and ON-TIME control on the motion sensor:

•TheRANGEcontrolandON-TIMEcontrolarelocatedonthebottom of the motion sensor. Using your fingernails or a small, flat-head screwdriver, gently pry the cover until it opens.

1.Check Operation. Set the ON-TIME control to TEST mode. Walk in front of motion sensor. The LED indicator light should flash when motion is detected (see illustration for location of LED light).

2.Adjust Motion Sensor. Turn the RANGE control to the mid posi- tion and ON-TIME control to the TEST position. Walk through coverage area noting where you are when the LED begins to flash. Loosen the clamp screw and move the motion sensor to change the coverage area. Tighten clamp screw when finished.

Do not overtighten clamp screw.

3.Adjust RANGE Control. To increase sensitivity, turn the RANGE control toward MAX. To decrease sensitivity, turn the RANGE control toward MIN. Note: If the RANGE is set too high, false triggering may result in some environments.

Note: When using test mode to check operation in the day time:

A.Set the DETECT control switch to DAY/NIGHT and

B.Set the ON-TIME control to TEST.

 

 

 

Range

ON-TIME

ON-TIME

RANGE

Control

Control

(MINUTES)

MAX

MIN

 

 

 

 

5 1 TEST

 

 

LED

Indicator

180° Motion Sensor Controls

4.Set ON-TIME Control. Determine the amount of time you want the connected device to stay on after motion is detected (1 or 5 minutes). Slide the ON-TIME control to the corresponding setting.

DualBrite® Dimmer Control

(240° Motion Sensor Only)

Light comes on half power for selected time after dusk (Off, 3 or 6 hours, until dawn). When motion is sensed, the light turns on full power for the selected ON-TIME (1 or 5 minutes) then returns to accent mode.

1.Select amount of time desired for accent lighting (DualBrite® control).

•Off

•3 Hours

•6 Hours

•Dusk to Dawn

IMPORTANT: Avoid Aiming Motion Sensor At:

•Objects that change temperature rapidly, such as heating vents, fans, and air conditioners. These air sources could cause false triggering.

•Areas where pets or traffic may trigger the control.

•Nearby large, light colored objects reflecting light may trigger the shut-off feature. Do not point other lights at motion sensor.

LED Indicator

 

 

 

Range

 

 

RANGE

Control

 

MAX

MIN

 

DualBrite®

DUSKTO 6 3 OFF

TEST 1 5

ON-TIME

DAWN HRS

(MINS)

Control

DUALBRITE™

ON-TIME

Control

240° Motion Sensor Controls

598-1306-02

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Features Code SettingsExample 1 Code Settings, System Example 2 Code Settings, SystemCode Switch Locations Code SwitchesWall Switch Receiver Floodlight Motion SensorSelect Night or 24 Hour Mode Installing BatteriesInstalling Motion Sensor 240 Motion SensorsDualBrite Dimmer Control Check Operation and AdjustmentMotion Sensor Controls Motion Sensor Coverage Area 180 Motion Sensor240 Wall Switch Receiver InstallationInstalling Wall Switch Receiver Receiver InformationBulb Replacement OperationFeatures and Ratings Wiring FloodlightFloodlight Lamp ModesTroubleshooting Guide Technical ServiceNo Service Parts Available for this Product Regulatory InformationTWO Year Limited Warranty Ejemplo 1 Calibraciones del código, sistema Calibraciones DEL CódigoCalibración de fábrica Ubicaciones DE LOS Interruptores DE Circuito Impreso Interruptores De circuito ImpresoDetector de movimiento de Interruptores de Fase DE LámparaDetectores DE Movimiento DE 180 Y Seleccione modo nocturno o modo de 24 horasInstalación de las baterías Instalación del Detector de MovimientoControl DualBrite de reducción de intensidad Revisión de la operación y de la regulaciónControles del Detector de Movimiento de 180 Área de Cobertura del Detector de Movimiento deMovimientoMovimiento Sensibilidad del Detector de MovimientoReceptor DE Pared CON Interruptor Información DEL ReceptorInstalación Operación Reemplazo de la bombillaInstalación del receptor de pared con interruptor Fases De Lámpara ReflectorCableado del reflector Guía de Análisis de Averías Servicio TécnicoInformación Regulatoria No hay piezas de servicio disponibles para este productoGarantía Limitada a 2 Años Caractéristiques Réglage DES CodesDu guide de référence Exemple 2 Réglage des codes, systèmeEmplacement DES MICRO-INTERRUPTEURS Détecteur de mouvement surInterrupteur récepteur mural ProjecteurInstallation Du Détecteur De Mouvement Sélection du mode de nuit ou du mode 24 heuresInstallation des piles Détecteurs DE Mouvement SUR 180 ETCommande Commandes du détecteur de mouvement surVérification du fonctionnement et du réglage Gradateur DualBriteMDZone de couverture du détecteur de mouvement sur MouvementMouvement DétecteurDétecteurSensibilité du détecteur de mouvement Réglage de la couverture du détecteur de mouvementInformations SUR LE Récepteur Installation de l’interrupteur transmetteur muralInterrupteur Récepteur Mural Remplacement de l’ampoule FonctionnementModes D’Éclairage ProjecteurCâblage du projecteur Service Technique Guide DE DépannageRenseignements de règlements Aucune pièce de rechange n’est disponible pour ce produitGarantie Limitée DE 2 ANS Is nça fra 598-1306-02

598-1306-02 specifications

Heath Zenith 598-1306-02 is a versatile and feature-rich motion-activated outdoor light that enhances home security while providing convenience and energy efficiency. This device is designed to detect motion within a specified range and illuminate outdoor areas, making it an excellent choice for homeowners looking to improve safety around their properties.

One of the hallmark features of the Heath Zenith 598-1306-02 is its advanced motion detection technology. The light is equipped with a passive infrared (PIR) sensor that can detect movement from people or animals in its vicinity. The sensor typically has an adjustable detection range, allowing users to customize how far away motion must occur for the light to activate. This feature is particularly beneficial for ensuring that high-traffic areas such as driveways, porches, and walkways are adequately lit when someone approaches.

In addition to its efficient motion detection capabilities, the Heath Zenith 598-1306-02 offers adjustable brightness settings. This allows users to set the light to a specific brightness level, accommodating various lighting needs. From a subtle glow to brightly illuminating a pathway, users can select the appropriate setting based on their preferences and the surrounding environment.

Another significant characteristic of this outdoor light is its weather-resistant construction. Designed for durability, the Heath Zenith 598-1306-02 can withstand various outdoor conditions, including rain, snow, and extreme temperatures. This ensures that the light remains functional and reliable year-round, enhancing its long-term value.

Moreover, the Heath Zenith 598-1306-02 is built with energy efficiency in mind, utilizing LED technology. LED lights consume significantly less energy compared to traditional incandescent bulbs, resulting in lower electricity bills and a smaller carbon footprint. This eco-friendly approach not only helps save money but also supports sustainability.

Installation is straightforward, thanks to the user's manual guiding users through the process. Whether mounted on walls, ceilings, or eaves, the compact design of the Heath Zenith 598-1306-02 allows it to blend seamlessly with a variety of architectural styles.

Overall, the Heath Zenith 598-1306-02 is an excellent choice for homeowners seeking a reliable and energy-efficient outdoor lighting solution. With its motion detection technology, adjustable brightness settings, durable construction, and energy-saving features, this light delivers on all fronts, making it a smart addition to enhance home safety.
Top Page Image Contents