Heath Zenith 598-1306-02 manual Motion Sensors, Select Night or 24 Hour Mode, Installing Batteries

Page 3

180° and 240° Motion Sensors

180° Motion Sensor

240° Motion Sensor

Features:

•No wiring required.

•Up to 70 feet sensing range, 180° or 240° Coverage (Depending upon model).

•Adjustable sensitivity.

•Day/Night or Night only operation.

•Test mode.

•DualBrite® Mode (240° Motion Sensor Only).

•Uses 2 AA batteries.

•Wall or eave mount.

•Controls receivers up to 100 feet (30 m) away.

Select Night or 24 Hour Mode

These motion sensors are able to detect motion day and night or night only. To set the detection mode, remove battery compartment cover by sliding the cover down. Remove batteries if necessary. Slide the DETECT switch to either the DAY/NIGHT or NIGHT ONLY position. Replace battery compartment cover by reversing the above instructions.

Installing Batteries

•Before mounting motion sensor, remove battery compartment cover by sliding the cover down.

Install 2 AA batteries according to polarity markings inside the battery compartment. Replace battery compartment cover by reversing the above instructions.

 

Installing Motion Sensor

 

1.

Install motion sensor mounting bracket where motion detection is

 

 

desired. Attach motion sensor mounting bracket to a sturdy object

 

 

(i.e. tree, post, house, etc.) using two screws provided. Make

 

 

sure unit has an unobstructed view. Note: Attach mounting

 

 

bracket vertically if connecting to a curved surface such as a

ENGLISH

 

post.

2.

Install motion sensor to mounting bracket. Using a Philips-head

 

screwdriver, loosen the clamp screw on the mounting bracket. Insert swivel ball mount on motion sensor into mounting bracket socket (Note:You should hear a snap).Aim motion sensor toward area where detection is desired. Tighten clamp screw.

IMPORTANT: The motion sensor must be mounted with the bottom cover facing down in order to maintain water tightness.

 

Mounting Bracket

Mounting

 

Bracket Socket

Mounting Screw

Nut

Clamp

Screw

Swivel Ball Mount

Sensor

Installing Motion Sensor

(180° Motion Sensor Shown)

Detect

Control

DAY NIGHT

NIGHT ONLY

 

 

 

 

 

 

1 2 3 4

 

DETECT

CODES

 

 

CODES DETECT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 2 3 4

DAY

NIGHT

NIGHT

ONLY

180° Motion Sensor

240° Motion Sensor

(Rear View)

(Rear View)

Battery Compartment

598-1306-02

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Example 2 Code Settings, System FeaturesCode Settings Example 1 Code Settings, SystemMotion Sensor Code Switch LocationsCode Switches Wall Switch Receiver Floodlight240 Motion Sensors Select Night or 24 Hour ModeInstalling Batteries Installing Motion SensorCheck Operation and Adjustment DualBrite Dimmer ControlMotion Sensor Controls 180 Motion Sensor Motion Sensor Coverage Area240 Receiver Information Wall Switch ReceiverInstallation Installing Wall Switch ReceiverOperation Bulb ReplacementLamp Modes Features and RatingsWiring Floodlight FloodlightRegulatory Information Troubleshooting GuideTechnical Service No Service Parts Available for this ProductTWO Year Limited Warranty Calibraciones DEL Código Ejemplo 1 Calibraciones del código, sistemaCalibración de fábrica Interruptores de Fase DE Lámpara Ubicaciones DE LOS Interruptores DE Circuito ImpresoInterruptores De circuito Impreso Detector de movimiento deInstalación del Detector de Movimiento Detectores DE Movimiento DE 180 YSeleccione modo nocturno o modo de 24 horas Instalación de las bateríasRevisión de la operación y de la regulación Control DualBrite de reducción de intensidadControles del Detector de Movimiento de Sensibilidad del Detector de Movimiento 180Área de Cobertura del Detector de Movimiento de MovimientoMovimientoInformación DEL Receptor Receptor DE Pared CON InterruptorInstalación Reemplazo de la bombilla OperaciónInstalación del receptor de pared con interruptor Reflector Fases De LámparaCableado del reflector No hay piezas de servicio disponibles para este producto Guía de Análisis de AveríasServicio Técnico Información RegulatoriaGarantía Limitada a 2 Años Exemple 2 Réglage des codes, système CaractéristiquesRéglage DES Codes Du guide de référenceProjecteur Emplacement DES MICRO-INTERRUPTEURSDétecteur de mouvement sur Interrupteur récepteur muralDétecteurs DE Mouvement SUR 180 ET Installation Du Détecteur De MouvementSélection du mode de nuit ou du mode 24 heures Installation des pilesGradateur DualBriteMD CommandeCommandes du détecteur de mouvement sur Vérification du fonctionnement et du réglageRéglage de la couverture du détecteur de mouvement Zone de couverture du détecteur de mouvement surMouvementMouvement DétecteurDétecteur Sensibilité du détecteur de mouvementInstallation de l’interrupteur transmetteur mural Informations SUR LE RécepteurInterrupteur Récepteur Mural Fonctionnement Remplacement de l’ampouleProjecteur Modes D’ÉclairageCâblage du projecteur Aucune pièce de rechange n’est disponible pour ce produit Service TechniqueGuide DE Dépannage Renseignements de règlementsGarantie Limitée DE 2 ANS Is nça fra 598-1306-02

598-1306-02 specifications

Heath Zenith 598-1306-02 is a versatile and feature-rich motion-activated outdoor light that enhances home security while providing convenience and energy efficiency. This device is designed to detect motion within a specified range and illuminate outdoor areas, making it an excellent choice for homeowners looking to improve safety around their properties.

One of the hallmark features of the Heath Zenith 598-1306-02 is its advanced motion detection technology. The light is equipped with a passive infrared (PIR) sensor that can detect movement from people or animals in its vicinity. The sensor typically has an adjustable detection range, allowing users to customize how far away motion must occur for the light to activate. This feature is particularly beneficial for ensuring that high-traffic areas such as driveways, porches, and walkways are adequately lit when someone approaches.

In addition to its efficient motion detection capabilities, the Heath Zenith 598-1306-02 offers adjustable brightness settings. This allows users to set the light to a specific brightness level, accommodating various lighting needs. From a subtle glow to brightly illuminating a pathway, users can select the appropriate setting based on their preferences and the surrounding environment.

Another significant characteristic of this outdoor light is its weather-resistant construction. Designed for durability, the Heath Zenith 598-1306-02 can withstand various outdoor conditions, including rain, snow, and extreme temperatures. This ensures that the light remains functional and reliable year-round, enhancing its long-term value.

Moreover, the Heath Zenith 598-1306-02 is built with energy efficiency in mind, utilizing LED technology. LED lights consume significantly less energy compared to traditional incandescent bulbs, resulting in lower electricity bills and a smaller carbon footprint. This eco-friendly approach not only helps save money but also supports sustainability.

Installation is straightforward, thanks to the user's manual guiding users through the process. Whether mounted on walls, ceilings, or eaves, the compact design of the Heath Zenith 598-1306-02 allows it to blend seamlessly with a variety of architectural styles.

Overall, the Heath Zenith 598-1306-02 is an excellent choice for homeowners seeking a reliable and energy-efficient outdoor lighting solution. With its motion detection technology, adjustable brightness settings, durable construction, and energy-saving features, this light delivers on all fronts, making it a smart addition to enhance home safety.
Top Page Image Contents