Heath Zenith 598-1306-02 manual Troubleshooting Guide, Technical Service, Regulatory Information

Page 9

Troubleshooting Guide

SYMPTOM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

 

 

 

 

 

Device does not come on.

1.

Circuit breaker or fuse is turned off.

1.

Verify circuit breaker or fuse is turned

 

 

 

 

 

 

on.

 

ENGLISH

 

2.

Switch on device is turned off.

2.

Verify switched device is turned on.

 

 

3.

Interrupted by another device.

3.

Change codes on transmitter and

 

 

 

 

 

receiver units.

 

 

 

4.

Does not respond immediately after

4.

Wait for 90 second initialization period

 

 

 

 

installation.

 

(remote motion sensor).

 

 

 

5.

Signals from transmitter are being

5.

Check for metal objects that could

 

 

 

 

blocked, or transmitter is out of range.

 

block the signal, or reposition the

 

 

 

 

 

 

transmitter.

 

 

 

6.

Weak battery in the transmitter.

6.

Check battery charge and replace if

 

 

 

 

 

 

necessary.

 

 

 

7.

Dip switches on transmitter and receiver

7.

Verify code settings on transmitter and

 

 

 

 

 

 

units do not match.

 

receiver units are set the same.

 

 

 

8.

Device is defective.

8.

Test using different device.

 

 

 

 

 

 

 

 

 

Device does not turn off.

1.

Same as 5, 6, and 7 above.

1.

Same as 5, 6, and 7 above.

 

 

 

 

 

 

 

 

 

Device comes on randomly.

1.

Short term power line failure.

1.

Next transmission from transmitter

 

 

 

 

 

 

will reset receiver to correct state.

 

 

 

2.

Another transmitter on the same

2.

Change codes on transmitter and

 

 

 

 

frequency.

 

receiver units.

 

 

 

 

 

 

 

 

 

Technical Service

Please call 1-800-858-8501 (English speaking only) for assistance before returning product to store.

If you experience a problem, follow this guide. You may also want to visit our Web site at: www.hzsupport.com. If the problem persists, call* for assistance at 1-800-858-8501(English speaking only), 7:30 AM to 4:30 PM CST (M-F). You may also write* to:

HeathCo LLC

P.O. Box 90004, Bowling Green, KY 42102-9004 ATTN: Technical Service

*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.

No Service Parts Available for this Product

Regulatory Information

This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could void the user’s authority to operate the equipment.

598-1306-02

Image 9
Contents Code Settings FeaturesExample 1 Code Settings, System Example 2 Code Settings, SystemCode Switches Code Switch LocationsWall Switch Receiver Floodlight Motion SensorInstalling Batteries Select Night or 24 Hour ModeInstalling Motion Sensor 240 Motion SensorsCheck Operation and Adjustment DualBrite Dimmer ControlMotion Sensor Controls 180 Motion Sensor Motion Sensor Coverage Area240 Installation Wall Switch ReceiverInstalling Wall Switch Receiver Receiver InformationOperation Bulb ReplacementWiring Floodlight Features and RatingsFloodlight Lamp ModesTechnical Service Troubleshooting GuideNo Service Parts Available for this Product Regulatory InformationTWO Year Limited Warranty Calibraciones DEL Código Ejemplo 1 Calibraciones del código, sistemaCalibración de fábrica Interruptores De circuito Impreso Ubicaciones DE LOS Interruptores DE Circuito ImpresoDetector de movimiento de Interruptores de Fase DE LámparaSeleccione modo nocturno o modo de 24 horas Detectores DE Movimiento DE 180 YInstalación de las baterías Instalación del Detector de MovimientoRevisión de la operación y de la regulación Control DualBrite de reducción de intensidadControles del Detector de Movimiento de Área de Cobertura del Detector de Movimiento de 180MovimientoMovimiento Sensibilidad del Detector de MovimientoInformación DEL Receptor Receptor DE Pared CON InterruptorInstalación Reemplazo de la bombilla OperaciónInstalación del receptor de pared con interruptor Reflector Fases De LámparaCableado del reflector Servicio Técnico Guía de Análisis de AveríasInformación Regulatoria No hay piezas de servicio disponibles para este productoGarantía Limitada a 2 Años Réglage DES Codes CaractéristiquesDu guide de référence Exemple 2 Réglage des codes, systèmeDétecteur de mouvement sur Emplacement DES MICRO-INTERRUPTEURSInterrupteur récepteur mural ProjecteurSélection du mode de nuit ou du mode 24 heures Installation Du Détecteur De MouvementInstallation des piles Détecteurs DE Mouvement SUR 180 ETCommandes du détecteur de mouvement sur CommandeVérification du fonctionnement et du réglage Gradateur DualBriteMDMouvementMouvement DétecteurDétecteur Zone de couverture du détecteur de mouvement surSensibilité du détecteur de mouvement Réglage de la couverture du détecteur de mouvementInstallation de l’interrupteur transmetteur mural Informations SUR LE RécepteurInterrupteur Récepteur Mural Fonctionnement Remplacement de l’ampouleProjecteur Modes D’ÉclairageCâblage du projecteur Guide DE Dépannage Service TechniqueRenseignements de règlements Aucune pièce de rechange n’est disponible pour ce produitGarantie Limitée DE 2 ANS Is nça fra 598-1306-02

598-1306-02 specifications

Heath Zenith 598-1306-02 is a versatile and feature-rich motion-activated outdoor light that enhances home security while providing convenience and energy efficiency. This device is designed to detect motion within a specified range and illuminate outdoor areas, making it an excellent choice for homeowners looking to improve safety around their properties.

One of the hallmark features of the Heath Zenith 598-1306-02 is its advanced motion detection technology. The light is equipped with a passive infrared (PIR) sensor that can detect movement from people or animals in its vicinity. The sensor typically has an adjustable detection range, allowing users to customize how far away motion must occur for the light to activate. This feature is particularly beneficial for ensuring that high-traffic areas such as driveways, porches, and walkways are adequately lit when someone approaches.

In addition to its efficient motion detection capabilities, the Heath Zenith 598-1306-02 offers adjustable brightness settings. This allows users to set the light to a specific brightness level, accommodating various lighting needs. From a subtle glow to brightly illuminating a pathway, users can select the appropriate setting based on their preferences and the surrounding environment.

Another significant characteristic of this outdoor light is its weather-resistant construction. Designed for durability, the Heath Zenith 598-1306-02 can withstand various outdoor conditions, including rain, snow, and extreme temperatures. This ensures that the light remains functional and reliable year-round, enhancing its long-term value.

Moreover, the Heath Zenith 598-1306-02 is built with energy efficiency in mind, utilizing LED technology. LED lights consume significantly less energy compared to traditional incandescent bulbs, resulting in lower electricity bills and a smaller carbon footprint. This eco-friendly approach not only helps save money but also supports sustainability.

Installation is straightforward, thanks to the user's manual guiding users through the process. Whether mounted on walls, ceilings, or eaves, the compact design of the Heath Zenith 598-1306-02 allows it to blend seamlessly with a variety of architectural styles.

Overall, the Heath Zenith 598-1306-02 is an excellent choice for homeowners seeking a reliable and energy-efficient outdoor lighting solution. With its motion detection technology, adjustable brightness settings, durable construction, and energy-saving features, this light delivers on all fronts, making it a smart addition to enhance home safety.