Panasonic CQ-4330U manual Cassette Tape Player

Page 12

Cassette Tape Player

Loading a Cassette

Insert the cassette with the exposed tape side facing to the right. Gently push the cassette in until the loading begins. The cassette will be loaded in place and playback starts.

Program Indicator

DISP

MODE

 

 

 

 

 

LOUD

OL

 

 

 

 

MUTE

USH

 

 

 

 

 

SEL/SAT

 

 

 

 

 

ASS/TREB

 

DISC

 

 

RDM

 

 

 

 

SCAN

L/FADER

1 MTL

2 NR

3 TPS

4 REP 5 SKP

6

 

 

 

 

 

 

ILL

Exposed Tape side

Ejecting the Tape

Press [u] and the cassette will eject for removal, and the previous mode of operation will be resumed.

Notes:

•If power is switched off before [u] is pressed, the cassette will not eject. Switch on the power again and press [u] to eject the cassette.

•The cassette tape should always be removed from the cassette slot when not in use.

Play Side Change

Press [ ] to switch to the program on the other side of the tape.

The display changes to indicate which program is playing.

Top Side Playing

Caution: Do not insert a tape when “tape” indicator “ ” or “ ” lights.

Note: To maintain your cassette player in top condition, avoid using tapes that are longer than 90 minutes (C-90).

Notes on Cassette Tapes

Tape Slack:

Use a pencil or similar object to take up the slack as shown. If a loose tape is used, this may result in the tape becoming tangled in the rotating parts of the unit.

Bottom Side Playing

Cassette Head Cleaning Warning

•The display will show “CLN HEAD” to remind you to clean the cassette head after accumulating 100 hours tape playing.

• Press and hold [ ] for more than 2 seconds to clear the “CLN HEAD” display and the TAPE mode display will resume. (It is valid only in TAPE mode.)

Rewind and Fast Forward

Pencil

Do not touch or pull out the tape.

Exposed end (Open end)

Press [1 TRACK] or [2 TRACK] to activate rewind or fast forward of the tape.

Program Indicator

Program Indicator

Press [

] to stop rewind or fast forward.

If you rewind the tape fully, it will play on the same program side again.

If you fast forward to the end, play will resume from the beginning of the other side of the tape.

12

CQ-4330U

Page 11 Page 13
Image 12
Page 11 Page 13
Contents CQ-4330U Safety Information Following applies only in the U.S.AFCC Warning CQ-4330UWhen Driving Use the Proper Power SupplyWhen Car Washing When ParkedContents Power and Sound Controls PowerVolume MuteIllumination Switching BassTreble BalanceClock Setting Time ResetSelecting the Clock Display Initial TimeAlarm Time Setting Initial Alarm TimeAlarm Operation Alarm output Volume SelectionRadio Radio Preset Station Setting Auto Preset Memory APMManual Preset Memory Preset Station CallingTuning in a Weather Band Station Weather Band StationsCassette Tape Player Metal Tape Mode Dolby B Noise ReductionTape Program Search TPS Operation Repeat PlayCD Changer mode CD Changer ControlDisc Selection Track SelectionError Display Messages Scan Play Tracks DiscsRepeat Play Tracks Discs Random Play Select the next available compact disc. Check the discXM Mode XM ControlChannel Scan Channel SelectionWhen the display shows CAT ON, Press 2 Up Press 1 Down Press and hold 1 to 6 for more than 2 seconds to memorizeSelect a band Press and hold Mode Disp for more than 2 seconds XM ID is communication fails, Press Mode to another modeTroubleshooting Preliminary StepsCommon XM ControlSound Setting RadioCassette Tape Maintenance Speaker ConnectionsProduct Servicing WrongInstallation Guide Dashboard SpecificationsOverview Dashboard Installation Installation HardwareUsing the rubber cushion option PreparationInstallation Mounting springs CExample To Remove the Unit from the vehicles dashboard Insert each Removal Tool i and pull Removal Tool U-shapedWiring Diagram Electrical ConnectionsUpgrading the system connect a XM receiver XM ReceiverUpgrading the system connect a CD changer CD Changer CD-DP880, optionSpecifications One Panasonic Way, Secaucus New Jersey
Top Page Image Contents