Panasonic CQ-4330U manual Specifications

Page 29

Specifications

❐ General

Power Supply:

12 V DC (11 V-16 V) test Voltage 14.4 V, Negative ground

Current consumption:

Less than 2.5 A (tape mode, 0.5 W 4-speaker)

Maximum Power Output:

37 W ⋅ 4 channels at 400 Hz, Volume Control maximum

Tone adjustment range:

 

Bass:

± 12 dB at 100 Hz

Treble:

± 12 dB at 10 kHz

Power Output:

18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD

Suitable Speaker Impedance:

4-8 Ω

Dimensions (W ⋅ H ⋅ D):

7" ⋅ 1-15/16" ⋅ 6-1/10" (178 ⋅ 50 ⋅ 160 mm)

Weight:

3 lbs. 12 oz (1.7k )

❐ FM Stereo Radio

Frequency Range:

87.9-107.9 MHz

Useable Sensitivity:

12 dBf. (1.1

µV/ 75 Ω, S/N 30 dB)

50 dB Quieting Sensitivity:

17 dBf. (1.8

µV/ 75 Ω)

Frequency Response:

30-15 000 Hz ±3 dB

Alternate Channel Selectivity:

75 dB

 

Stereo Separation:

35 dB at 1 kHz

Signal/Noise Ratio:

70 dB (Mono)

❐ AM Radio

Frequency range:

530 kHz–1 710 kHz

Usable sensitivity:

28 dB/µV (25 µV, S/N 20 dB)

❐Weather Band Radio

Frequency Range:

162.40-162.55 MHz

Useable Sensitivity:

3 dB/µV (S/N 20 dB)

Signal/Noise Ratio (40 dB/µV):

50 dB

❐ Tape Player

Reproduction System:

4-track, 2-program stereo

Tape Speed:

1-7/8"/sec (4.76 cm/sec)

FF/REW Time:

Less than 110 sec (C-60)

Frequency Response:

35-14 000 Hz ±3 dB

Wow and Flutter:

0.12 % (WRMS)

signal/Noise Ratio:

52 dB (Dolby NR on: 62 dB)

Above specifications comply with EIA standards.

Note: Specifications and design are subject to modification without notice due to improvements in technology.

Dobly noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double-D symbol A are trademarks of Dolby Laboratories Licensing Corporation.

29

CQ-4330U

Page 28 Page 30
Image 29
Page 28 Page 30
Contents CQ-4330U Following applies only in the U.S.A Safety InformationFCC Warning CQ-4330UUse the Proper Power Supply When DrivingWhen Car Washing When ParkedContents Power Power and Sound ControlsVolume MuteBass Illumination SwitchingTreble BalanceTime Reset Clock SettingSelecting the Clock Display Initial TimeInitial Alarm Time Alarm Time SettingAlarm Operation Alarm output Volume SelectionRadio Auto Preset Memory APM Radio Preset Station SettingManual Preset Memory Preset Station CallingWeather Band Stations Tuning in a Weather Band StationCassette Tape Player Dolby B Noise Reduction Metal Tape ModeTape Program Search TPS Operation Repeat PlayCD Changer Control CD Changer modeDisc Selection Track SelectionScan Play Tracks Discs Error Display MessagesRepeat Play Tracks Discs Random Play Select the next available compact disc. Check the discXM Control XM ModeChannel Scan Channel SelectionSelect a band When the display shows CAT ON, Press 2 Up Press 1 DownPress and hold 1 to 6 for more than 2 seconds to memorize XM ID is communication fails, Press Mode to another mode Press and hold Mode Disp for more than 2 secondsPreliminary Steps TroubleshootingCommon XM ControlCassette Tape Sound SettingRadio Speaker Connections MaintenanceProduct Servicing WrongOverview Installation GuideDashboard Specifications Installation Hardware Dashboard InstallationUsing the rubber cushion option PreparationExample InstallationMounting springs C Insert each Removal Tool i and pull Removal Tool U-shaped To Remove the Unit from the vehicles dashboardElectrical Connections Wiring DiagramXM Receiver Upgrading the system connect a XM receiverCD Changer CD-DP880, option Upgrading the system connect a CD changerSpecifications One Panasonic Way, Secaucus New Jersey
Top Page Image Contents