Panasonic SC-ZT2 warranty Important Safety Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod,

bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SCREWS.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Caution

Use the speakers only with the recommended system. Failure to do so can damage the amplifier and speakers, and can cause fire. Consult a qualified service person if damage

occurs or if a sudden change in performance is apparent.

Do not attach these speakers to walls or ceilings.

2

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,

*DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

*USE ONLY THE RECOMMENDED ACCESSORIES.

*DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

The unit should be installed near an accessible AC power outlet, with the power cord connected directly to it.

To completely disconnect power from the unit, unplug the power cord from the AC power outlet.

CAUTION!

Do not place anything on top of this unit or block the heat radiation vents in any way. In particular, do not place DVD recorder or CD/ DVD players on this unit as heat radiated from it can damage your software.

VQT2R70

Image 2
Contents Speakers Warranty can be found onMain unit control box part If you have any questions contactImportant Safety Instructions Table of contents Setting the speakers Setting up your Home Theater systemInstalling the speakers Enjoying movies and musicMain unit Control box Supplied accessoriesControl guide Front viewSpeaker with built-in amplifier Base woofer part For switching the speaker ID switch ON/OFFControl guide Rear viewUsing the remote control Remote control preparationRemote control Inserting the batteries„ Equipment certification InstallationWireless functions „ Restrictions for use„ Enjoying only with TV speaker Basic connections„ Hdmi cable notes Home Theater connections Connecting STB etcSetting for automatically switching the input source to STB Audio cable Digital audio out opticalVideo cable DVD player VCR, etcTo connect a second set of equipment that supports Hdmi AC power supply connectionOther connections To connect audio equipment CD player, etcTurn the main unit on Speaker settingSetting the speakers Turn 2 speakers onInstalling surround speakers Speaker settingChecking the speaker setting Press Test on the remote control to stop the test signalSetting surround speakers Turn Aim the remote control towardEnjoying movies and music Main unit of this systemEnjoying sound field effects You can select Speaker Selection Home Cinema or TV Using the Viera Link Hdavi ControlWhat you can do with Viera Link Hdavi Control This system supports Hdavi Control 4 functionViera Link Hdavi Control Compatible Equipment Out optical Main unitHdmi input Make sure to connect toUsing Game Functions and settingsUsing WHISPER-MODE Surround Adjusting the bass woofer part outputAdjusting sound quality Adjusting the volume balance of front speakersSetting 7.1-channel virtual surround Functions and settingsSetting distances Press er to select the distance and press OKClear audio at low volume Viera Link Hdavi Control settingSwitching between dual sounds Switching the attenuator„ Repeat steps 3 and 4 to change setting Switching the input signal detection settingReset factory settings Input TV, DVD, AUX1, AUX2Specifications Error messagesUsing with headphones Display Check point/Cause/Countermeasure PagesTroubleshooting guide Digital signals that can be played on this system MaintenanceGlossary User memo If you see this symbolProduct information Dolby LaboratoriesLimited Warranty only for U.S.A. and Puerto Rico Panasonic Home Audio Products Limited WarrantyLimited Warranty only for Canada Corporation of North America Safety precautionsFCC Note Panasonic Corporation
Related manuals
Manual 32 pages 10.56 Kb Manual 32 pages 62.51 Kb