VIERA Link “HDAVI Control” setting
When you do not wish to use VIERA Link “HDAVI Control”
(➜ page 18), you can set the unlinked operation by selecting “OFF ”.
The normal setting is “ON ” (Linked operation).
1. Press and hold
2 seconds.
The setting items are displayed. (➜ page 21)
2.Press [w][q] to select “HDMI ” and press [OK].
3.Press [w][q] to select “CTRL ” and press [OK].
4.Press [e][r] to select “ON ” or “OFF ”
and press [OK].
ON : When the operation is linked
OFF : When the operation is not linked
Factory setting: ON
5.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.
Note
•When “CTRL OFF ” is set, the ARC function will be disabled. Be sure to make the optical digital connection or analog connection. (➜ page 9)
Adjusting the time lag between audio and video by delaying audio output
You can reduce audio and video time lag by adjusting sound delay.
1. Press and hold
2 seconds.
The setting items are displayed. (➜ page 21)
2.Press [w][q] to select “SOUND DLY ” and press [OK].
3.Press [e][r] to select the setting and
press [OK].
AUTO, OFF, 10, 20, 30, 40, 60, 80, 100, 120, 140,160, 180, 200
Factory setting: AUTO
4.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.
Note
•If delaying audio output is not necessary, select “OFF ”.
•“AUTO ” is effective only when connecting the Panasonic TV (VIERA) supporting HDAVI Control 3 and later versions. (Auto Lip Synchronization Function)
•When you connect the Panasonic TV incompatible with HDAVI Control 3 and later versions or
Switching between dual sounds
You can switch between dual sounds of Dolby Digital signals.
1. Press and hold
2 seconds.
The setting items are displayed. (➜ page 21)
2.Press [w][q] to select “DUAL PRG ” and press [OK].
3.Press [e][r] to select the audio and press
[OK].
MAIN : Main audio SAP : Sub channel audio output
M+S : Main + Sub channel audio output
Factory setting: MAIN
4.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.
Clear audio at low volume
Dynamic range compression function for Dolby Digital.
It compresses the dynamic range so that you can still hear dialog and leave the sound field unaffected.
Use this function when you have to turn the volume down, such as late at night.
1. Press and hold
2 seconds.
The setting items are displayed. (➜ page 21)
2.Press [w][q] to select “DRCOMP ” and press [OK].
3.Press [e][r] to select the setting and
press [OK].
OFF : Normal playback
STANDARD : The best suited playback for each audio source
MAX : Always compressed at the maximum level
Factory setting: OFF
4.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.
Switching the attenuator
Switch the attenuator “ON ” when big sounds become distorted while playing an analog input source.
1. Press and hold
2 seconds.
The setting items are displayed. (➜ page 21)
2.Press [w][q] to select “ATTENUATOR ” and press [OK].
3.Press [e][r] to select “ON ” and press
[OK].
ON, OFF
Factory setting: OFF
4.Press [ RETURN] several times to select “EXIT ” and press [OK] to finish the setting.
Functions and settings
Play
23
VQT2R70