Control guide Before use
Control guide
Rear view
Subwoofer output
AC inlet (➜ page 12) terminal (➜ page 12) Digital audio input terminal (➜ pages 9 to 11, 19)
Audio output terminal | Audio input terminal | HDMI terminal (➜ pages 9, 10, 12, 19) |
(➜ below) | (➜ pages 9 to 12) |
|
Note
The audio output terminals can be used when you do not use the wireless function and play back on other speakers via an external amplifier. Use commercially available monaural audio cables (monaural mini plug/pin plug) to connect to audio input terminals of an external amplifier channel by channel.
Saving energy
This system is designed to conserve its power consumption and save energy.
•This system is automatically turned off when no signal is input and no operation is performed for approx. 30 minutes.
Speaker (with built-in amplifier)
Pole
Front view
[WIRELESS LINK] indicator
(➜ page 13)
Side view |
|
AC inlet | TEST |
(➜ page 12) | terminal |
TEST | ID |
AC IN |
|
Base (woofer part)
For switching the speaker | ID switch |
“ON/OFF” (➜ page 13) |
|
Note
TEST terminal: This is used to check the product operation status. Only used in factory. Do not insert a foreign object.
ID switch: This is used to check the product operation status and not used regularly.
6
VQT2R70