Enjoying movies and music
Enjoying movies and music
Preparations • Turn on the TV and switch its input to match the connection (HDMI, for example) using the TV remote control.
• Make sure that the speakers are on. (The following are operations when the power is on in Wireless Link Standby.)
Aim the remote control toward the |
|
|
| |
signal sensor (➜ page 7) on the | 1 |
|
|
|
main unit of this system. |
| Press this button to turn on the system. | ||
|
|
|
| |
| 2 |
| To select the source press one of these | |
| or | buttons. | ||
|
|
|
| |
|
|
| TV | : TV (optical,analog) |
|
|
| BD/DVD | : |
|
|
| AUX 1 | : AUX1 terminal (HDMI) |
|
| or | AUX 2 | : AUX2 terminal (optical) |
|
| AUX 3 | : AUX3 terminal (analog) | |
|
|
|
Play | (The input source switches each time you | ||
press the button.) | |||
TV | : TV (optical, analog) | ||
| |||
| BD/DVD | : | |
| AUX 1 | : AUX1 terminal (HDMI) | |
| AUX 2 | : AUX2 terminal (optical) | |
| AUX 3 | : AUX3 terminal (analog) |
3 | Start play on the connected |
equipment. | |
4 | To adjust the volume. |
| Turn | |
| Note | |
| • See page 27 for digital signals that can be played on this system. | |
| • Depending on the playback signal, you may feel the volume of the bass or surround speakers is not balanced with | |
| the volume of the front speakers. In this case, you can adjust the speaker volume during playback. (➜ page 20) | |
| • Even if you switch input to “TV ”, images (or audio) of the equipment connected to the BD/DVD IN terminal or AUX1 | |
| terminal are output from the TV OUT terminal. When the equipment is connected to both the BD/DVD IN terminal and | |
| AUX1 terminal, signals of equipment whose input is lastly selected are output. | |
| • When using a DVD recorder with | |
| mounted), select the input as follows in step 2 above. | |
| To enjoy DVD (when connected to AUX2): select “AUX 2 ”. | |
16 | ||
To enjoy video (when connected to AUX3): select “AUX 3 ”. | ||
|
|
VQT2R70