Setting up your Home Theater system Before use
Setting up your Home Theater system
Step
1Installing the speakers (➜ page 8)
You can make your preferred setting because speaker cords are not required.
• Make sure to place the speakers on a flat, stable surface so there is no danger of them falling over.
• AC power supply cord (included) is necessary for each speaker.
Step | Connecting the television and DVD recorder (➜ page 9) | |
2 | ||
(Peripheral equipment and cables are not included unless otherwise mentioned.) |
Install and connect the main unit and other equipment.
Connecting TV
Necessary cable:
(For images and audio) HDMI cable: 1 (not included)
Connecting recorder | I need 2 HDMI |
Necessary cable: | cables for |
(For images and audio) HDMI cable: 1 (not included) | connections. |
|
•Connect with an HDMI cable for
•This connection requires HDMI terminals on both the television and the DVD recorder.
Step
3Setting the speakers (➜ page 13)
Use the remote control for speaker setting.
• Make sure to set the speakers when using for the first time after purchase.
Step
4Enjoying movies and music (➜ page 16)
Enjoy surround sound with DVDs, TV, and other sources.
• Audio is transmitted wirelessly.
4
VQT2R70