Pelco DS NVS manual Cameras Directory, Configuration Parameters

•Email Configuration: Allows you to select e-mail addresses that receive messages when an alarm event happens in a zone. To identify and test the mail server, refer to the Email Notification on page 35. To select e-mail addresses, click Add Email Account to open the window shown in Figure 28 on page 33. Add e-mail addresses as desired, and then select cameras from the zone. For each selected camera, a JPEG image of the alarm event will be attached to the e-mail messages; you can adjust the image resolution and quality using the slider bars under JPEG Image Properties.

Figure 28. Add Email Account(s) Window

Changes to a zone configuration are applied when you save them.

CAMERAS DIRECTORY

The Cameras directory under a DS server in the directory tree contains a list of all cameras configured on all VAUs in the tree. Refer to Adding and Configuring Cameras on page 17 for more information.

CONFIGURATION PARAMETERS

The Configuration Parameters directory contains several miscellaneous parameters for a DS system. Clicking this directory opens the Configuration Parameters list (refer to Figure 29). To change a parameter, select it in the list and enter a value allowed in the Description field. The value can be either a quantity, such as number of MB, or a code number.

Figure 29. Configuration Parameters Window for Miscellaneous Settings

The Parameters list contains the following settings (applicable code numbers in parentheses):

•Interface/EventImageDisplay: Automatically displays event images when the event occurs. Choose 1 to automatically display event images or choose 0 (zero) not to automatically display event images.

•Services/DebugFlag: Limits the type of data written to the log file: none (0), basic information (1), or all information (2).

•Services/LogFileSizeKB: Limits the size, in KB, of the Video Server log file. When the log file reaches this size, it replaces the oldest data with the newest data.

C3663M-B (11/09) 33