Rinnai RHFE-431FA Emergency Procedures, During a Thunderstorm, Daily Inspection and Maintenance

Page 30

Insert a board under the unit when placing on carpeted floor ! ! !

This heater may be installed on combustible flooring. When the heater is installed directly on carpeting, tile or other combustible material other than wood flooring, the heater shall be installed on a metal or wood panel extending the full width and depth of the heater.

Emergency Procedures:

Stay calm and turn the unit off ! ! !

In case of an emergency (e.g., abnormal overheating of the unit, loud noise), always stay calm, turn the unit off by pushing the ON/OFF button, close the gas valve and contact your dealer or the Rinnai office or store near you.

During a Thunderstorm

When a thunderstorm is approaching, turn the unit off and unplug the power cord. Heavy thunderstorm may cause damage to the unit.

Daily Inspection and Maintenance

Be sure to perform daily inspection and maintenance procedures. (See page 29 and 35 for details.) In particular, check the gas connection, power connection and air supply/exhaust pipe connection.

Do not use the unit if you suspect malfunctioning or damage. Incomplete repairs are dangerous. In case of malfunctioning, read the instructions on page 39 and contact your dealer or the nearest Rinnai office.

During Snow Accumulation

If the air supply/exhaust vent is covered by snow or damaged by falling icicles, the exhaust may be blocked and cause

malfunctioning of the unit. Keep the area around the air

 

 

 

 

 

 

snow

 

 

 

 

 

 

 

 

 

supply/exhaust vent free of snow and icicles. Minimum

 

 

 

 

 

 

 

 

 

 

 

 

 

 

clearance from snow accumulations should be at least (24").

 

 

24"

 

Installation of Unit:

Please ask your dealer to install the unit properly in a safe location:

Refer to the installation manual to make sure the unit is installed properly.

Customer's Operating Information

The following pages explain how to use the Forced flue heater.

Also read “Operating Precautions” on pages 2426.

When Using for the First Time

Check the power cord and power plug.

Firmly plug the unit into an electrical outlet, ensure outlet is properly grounded. An outlet that is not grounded properly can cause unit to operate erratically.

Make sure the power cord is not exposed to the heat from the exhaust pipe.

Fully open the gas valve in the room.

– 28 –

Image 30
Contents RHFE-431FAⅢ Table of Contents Features of the RHFE-431FA Units Safety DevicesGeneral Information Important Points / Usage and Installation Musts Included in CartonPage Dimensions Specifications SpecificationsAIR Supply Safety Points Gasoline Getting to Know Your NEW RHFE-431FA ALL Buttons Beep When Operated Control PanelCUT-AWAY Diagram Page Installation Instructions GAS Connection Flue Manifold Position Secure Heater to WallWall Mounting Brackets Vent Termination Clearances WindowordoorthatmaybeopenedLocation / Clearances Flue SizesStandard Installation of Flue Manifold Snow AreasFIT Back Covers Sides only Sleeve and Manifold Installation Method for Standard WallsProvided to compensate for weather board angle Fitting Unit AIR Inlet HoseLocking Clamp Screw Clamp and Insulation Instruct Customer on USE of Heater Operating Instructions Temperature Control IgnitionTo Turn Unit OFF Room Temperature DisplayOperating Precautions Economy ButtonUsage Usage LocationRequired Distance from Flammables Installation of Unit Emergency ProceduresDaily Inspection and Maintenance When Using for the First TimeBefore the Cold Season Begins Child Safety LockSensible Temperature Control AIR Flow ControlAdding Water to Humidifier Care of Unit ExteriorCare of Air Filter Page Testing Unit Fault-Failure ProcedureDuring Combustion PRE-SERVICE CheckAt Ignition Other PointsTrouble Shooting Smellof gas NoisyignitionMaintenance / Service Maintenance SuggestionsCode Color Warranty Information Consumer SupportHeat Exchanger Year of Failure Allowance Schematic Diagram Page Page Page Page Parts List Page Page Page Part Name QTY Remarks Rank Parts Name Parts no QTY Remarks Vent KIT RHFE-431FA Names and Numbers of Parts RHFE-431FA Installing AN Extension KIT MODELRHFE-431FAHow to connect exhaust pipes How to connect air intake hoseHow to use the bent pipe Maximum extendable length To prevent water condensationQualified Installing Agency Technical Data GAS Conversion SpecificationsGAS Pressure Setting Procedure Page 431F-1700×1700

RHFE-431FA specifications

The Rinnai RHFE-431FA is an advanced heating appliance designed to provide efficient warmth and comfort in residential spaces. With its sleek design and powerful performance, this model is a top choice for energy-conscious consumers seeking both functionality and aesthetics.

One of the standout features of the RHFE-431FA is its high heating efficiency, which helps reduce energy costs while ensuring a consistent and comfortable indoor climate. It operates using advanced gas technology, providing instant heat without the need for a cumbersome heating system. This unit is capable of delivering up to 4.2 kW of heating power, making it suitable for a variety of room sizes.

The unit's compact size and wall-mounted design allow for flexible installation options, blending seamlessly into any decor. The stylish front panel adds a modern touch while maintaining an unobtrusive presence. Additionally, the RHFE-431FA is available in multiple color options, ensuring that homeowners can choose a finish that best matches their interior design.

Equipped with Rinnai's advanced convection heating technology, the RHFE-431FA generates warmth that rises and circulates throughout the room efficiently. This method ensures that the heat is evenly distributed, eliminating cold spots and providing a comfortable living environment. The built-in fan helps to expedite heat distribution, making the unit effective in both small and larger areas.

The intelligent control system of the RHFE-431FA includes a user-friendly digital display, allowing for easy temperature adjustments and operational settings. The unit can be programmed to maintain specific temperatures, promoting energy savings when the space is unoccupied. Additionally, the unit features a child lock mechanism for added safety, making it an excellent choice for families.

Rinnai places a strong emphasis on safety, and the RHFE-431FA is no exception. This model is designed with multiple safety features, including an automatic shut-off function, ensuring peace of mind for users. Its silent operation also makes it a perfect addition to bedrooms or quiet spaces.

In summary, the Rinnai RHFE-431FA is a versatile and efficient heating solution that combines modern design, advanced technology, and safety features. Whether for a cozy family room, a bedroom, or any other space, this model promises to deliver comfort and warmth while being mindful of energy consumption.