Rinnai RHFE-431WTA Override Function, To turn on the Override function, If the current timer

OVERRIDE FUNCTION

■This function is used when the heater is in “Auto” mode(timer operation).

■It allows you to “Override” the preset timer setting until the beginning of the next period.

For example, if the heater is ON, pressing the “Override” button will turn it OFF until the next priod. If the heater is OFF, pressing the “Override” button will turn the heater ON, and allow you to select a temperature, until the next period.

■To turn on the Override function:

Remember: The Override function is for use in the “Auto”(timer) mode only.

1 Press the “Override” button. Override

One of the following will happen depending on the current timer period setting:

If the current timer	or	If the current timer
period is ON (heating)		period is OFF
The heater will turn OFF, the		The heater will turn ON, the manual
temperatures will display “-”, and the		pre-set temperature and room
“Override” and “Off” indicators will light.		temperature will show , and the
		“Override” and “On” indicators will light.

Set	Room		ON		Set	Room	ON
pm	Auto			pm		Auto
		Override	Off			Override	On
Tu				Tu
3				3	OFF

2	The heater will remain OFF until	Press the “ ▲ ” or “ ▼ ” buttons to manually
		adjust the pre-set room temperature.

a. the next timer period, or

b. the Override function is turned off manually(see step below).

The heater will remain heating until

a. the next timer period, or

b. the Override function is turned off manually (see step below).

■To turn off the Override function:

1 Press the “Override” button.

Then the heater will return to the operation of the current timer period.

–33 –