Drilling Flue Hole
Ensure that there are no gas or water lines, or electrical circuits in the wall location where the flue hole is to be drilled.
Drill the flue hole using a 3 1/8 inch (80 mm) drill. A template is provided. The center of the hole must be located anywhere within the shaded area, unless extension kits are used. See the dimensions diagram.
For weatherboard walls, drill through the center of the weatherboard from the outside first and then through the plasterboard.
Attach Wall Brackets
Attach the wall brackets as shown. A template is provided.
Attach Back Spacers
Attach side back spacers to both sides of the appliance with 2 screws each.
Flue Hole
1/8"3 mm)(80
30 723
Wall bracket | 24 |
593
20 | Rinnai Corporation ES38 Manual |