Using the Channel Input Gain Controls

Adjusting the Gain controls for each channel permits you to fine tune the level of each of the audio inputs, since input levels usually vary. Rotate the Gain controls clockwise to increase levels. After you preset the gain levels for each input, it is recommended that you do not adjust them further, as you can cause sound level imbalances during a mix.

Connecting the Mixer Outputs

Output to an Amplifier

To play the mixer’s output signal through your speaker system (for events such as parties, dances, conferences, etc.) connect an audio patch cord (not supplied) from the mixers AMP L and R jacks to your receiver amplifier’s left and right input jacks.

This mixer features two kinds of output jacks for you to choose from: RCA style and 1/4” type. DO NOT USE BOTH SIMULTANEOUSLY.

Output to a Tape or Digital Audio Recorder

To play the mixer’s output signal through your speaker system (for events such as parties, dances, conferences, etc.) connect an audio patch cord (not supplied) from the mixers REC L and R jacks to your receiver/amplifier’s left and right input jacks.

Zone Output

To monitor the mixer output to a second set of speakers in the DJ booth (or in a remote location) connect an audio patch cord (not supplied) from the mixers ZONE L and R jacks to your secondary amplifier’s left and right input jacks.

CAUTION: In order to avoid sudden unpleasant sound output, adjust the output devices controls to these settings before you connect the mixer’s output jacks to these devices’ input jacks.

OUTPUT DEVICE	CONTROL	SETTING

Tape Deck	POWER	OFF
Amplifier/Receiver	POWER	OFF
	TONE	FLAT

Using Headphones

Plug a pair of stereo headphones (not supplied) with a 1/4” jack into the Phones input. Using headphones not only affords you the opportunity to listen privately, but also enables you to monitor (”cue”) the incoming audio sources so you can locate an exact passage or section before mixing it in. It also gives you the opportunity to set up the relative volume level of the upcoming passage before it joins the mix.

Listen Safely! Please observe the following:

Do not listen at extremely high volume levels. Extended, high-volume listening can lead to permanent hearing loss. Follow these guidelines to protect your hearing, especially when using headphones.

Always start by setting the volume level to the lowest possible level before listening.

Put headphones on, and then gradually increase the volume as necessary.

Once you set the volume level do not increase it. Over a period of time, your ears adapt to a volume level and there is a temptation to increase it. Even though such an increase may not cause discomfort, it might still damage your hearing.

Stereo Headphones

Connecting the Lamp

12V/3W lamp

If you wish to intall a console lamp (not supplied), simply insert the plug end of an appropriate 12V/3W gooseneck style or similar lamp into the lamp socket provided in the upper right corner of the mixer control panel. Power is supplied to this lamp when the mixer power switch is turned on.

8 – Pyle Pro Mixer Owner’s Manual

Pyle Pro Mixer Owner’s Manual – 9

PYD-1940, PYD-1950, PYD-1930, PYD-1910, PYD1920 specifications

PYLE Audio has established itself as a prominent name in the audio equipment industry, delivering high-quality products tailored for professional and home use alike. Among its impressive lineup, the PYD series—comprising the PYD1920, PYD-1910, PYD-1930, PYD-1950, and PYD-1940—stands out for its remarkable features, cutting-edge technology, and outstanding performance.

The PYD1920 is designed with versatility in mind. It boasts a peak power output of 2000 watts, making it an excellent choice for both live sound and home audio systems. Featuring advanced digital signal processing, this model ensures crystal-clear sound quality while minimizing noise and distortion. The PYD1920 is equipped with multiple input options, including HDMI, USB, and RCA connectors, ensuring compatibility with various devices.

Following closely is the PYD-1910, which focuses on delivering an impressive audio experience in a compact design. With a peak output of 1000 watts, it remains powerful without sacrificing portability. The PYD-1910 is fitted with a built-in Bluetooth receiver for seamless connectivity to mobile devices and laptops, allowing users to stream music with ease. Its intelligent protection circuitry prevents overheating and damage from voltage spikes.

The PYD-1930 enhances the listening experience with its multi-channel configuration. This model supports a variety of audio formats and includes integrated EQ settings for tailored sound. With an output of 1500 watts, it packs a punch that's ideal for parties or larger gatherings. The intuitive interface allows users to control their audio settings effortlessly, making it suitable for both beginners and experienced audio enthusiasts.

Exploring further, the PYD-1950 is engineered for high-fidelity sound reproduction. It features a unique low-frequency enhancement technology that boosts bass response, perfect for those who enjoy deep, immersive sound. Additionally, its sleek design and LED display add a modern touch, while the robust cooling system ensures its reliability during extended use.

Lastly, the PYD-1940 prides itself on user-friendly features, including remote control operation and customizable sound profiles. With a solid output of 1200 watts, it offers a robust solution for various audio applications. Its striking design, combined with uncompromising performance, makes the PYD-1940 a popular option among users seeking both functionality and style.

In summary, the PYLE Audio PYD series offers a range of powerful audio solutions, with each model equipped with unique technologies and features aimed at delivering exceptional sound quality. Whether for professional use or personal enjoyment, these models cater to diverse audio needs.