Stovax 8700CFCHEC, P8701CFCHEC Assembling the Appliance, Both Method 1 or 2 Masonry Installation

Page 20

INSTALLATION INSTRUCTIONS

INSTALLATION

Both Method 1 or 2 - Masonry Installation

4.10• Remove the compression elbow from the appliance and connect it to the gas supply pipe

As the loose box is fitted into the main appliance:

•Pass the elbow and supply pipe through the silicone panel on the left side

•Engage the rear of the box onto the three studs on the rear of the appliance and lower the front edge

•Replace the three wing nuts and seven screws

•Replace the rear loose panel

•Ensure the lower edge engages into the tapered brackets

•PURGE THE SUPPLY PIPE. This is essential to expel any debris that may block the gas controls

•Connect the elbow to the appliance inlet pipe, Diagram

33

33

AR1963

4.11• Connect a suitable pressure gauge to the test point located on the inlet fitting

• Turn on the gas

The burner must be temporarily fitted whilst completing this procedure

•Light the appliance and check for leaks

•Turn the appliance to maximum and check that the supply pressure is as stated on the data badge

•Turn off the gas and replace the test point screw

•Turn the gas back on and check the test point for leaks

•Replace the splitter plate and burner

5.ASSEMBLING THE APPLIANCE

5.1• Add the pebbles making sure they are flattened so they are level with the rim of the tray

TAKE CARE NOT TO SPILL PEBBLES INTO THE PILOT AREA

ONLY PEBBLES SUPPLIED BY GAZCO CAN BE USED IN THIS FIRE

5.2With the back panel held in place:

•Place the bottom panel at the base of the fire

•Slide the side panels into position

5.2With the back panel held in place:

•Place the bottom panel at the base of the fire

•Slide the side panels into position

34

AR1865

5.3To fit the window frame:

•Keep the frame in the upright position with the locks uppermost

•Offer the frame to the foot of the opening

•Slide the frame to the right to locate the right hinge pin

35

AR1863

5.4• Manoeuvre the frame up towards the left side to locate the left hinge pin

•Slide onto the hinge with a right movement

•Secure in place with a spring clip at the right hinge pin,

Diagram 36

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents PR0957 Studio Issue 3 January StudioCovering the Following Model Studio 1 conventional flue APPLIANCE COMMISSIONING CHECKLIST FLUE CHECKFail GAS CHECKMAN Mode User InstructionsGeneral Lighting the Studio2B Touch PAD Control Cleaning the Studio Using the allen key providedChanging the Studio Batteries Emergency Shut OFFFire will not Light Arrangement of Fuel BEDHOT SURFACES Covering the Following Models Installation InstructionsTechnical Specification Packing Checklist Qty Description Fixing Kit containingSteel Frame Dimensions Dimension StudioBauhaus Frame Dimensions Studio 846 1046 520 750 950 424 12.5SITE REQUIREMENTS Flue OptionsGAS Supply Ventilation440 1160 Installation of the appliance InstallationSafety Precautions There is AN Optional Duct KIT, Code No Stud Work InstallationStud Work Installation Method 1 Frame AR1903 Stud Work Installation Method 2 Edge Remove the remaining rear and lower panel, Diagram Masonry chimney InstallationDoor is now free to remove, Diagram Method 1 Frame To replace the doors and panels, refer to Replacing Parts, Method 2 no FrameBoth Method 1 or 2 Masonry Installation Assembling the ApplianceThermostatic Remote Control By thermostatic remote control Using the fire’s touch padLighting the Studio Touch PAD ControlCommissioning For future reference, record the installation details onCommissioning Servicing Requirements Servicing / Fault Finding ChartsServicing Instructions Ignition Functional Check Flame Failure Functional CheckReplacing Parts Window Frame AssemblyGeneral Decorative FrameGlass Window Black Enamelled PanelsMaIN Burner Ensure no stone pebbles fall into the pilot areaMaIN Control Assembly Pilot Unit AssemblyRemove the screw retaining the pilot cover, Diagram Ignition LeadMagnetic safety valve Remove the cover fixing screw, DiagramGAS Valve Control BOXDebris Area Access Main injectorPrimary Aeration Plate Changing between Gas TypesPressure and Leak Testing the Appliance Access to the pressure test point can now be reached DiagramG31 N/A ShoRt Spares ListG30 N/A Service Records Member of the Stovax Group

8701CFCHEC, P8700CFCHEC, P8701CFCHEC, 8700CFCHEC specifications

Stovax, a renowned name in the world of wood-burning stoves and fireplaces, offers a range of high-performance heating solutions designed for both efficiency and aesthetics. Among their standout models are the P8701CFCHEC and P8700CFCHEC, as well as their closely related variants, 8701CFCHEC and 8700CFCHEC. These models showcase the commitment of Stovax to blend modern technology with traditional heating methods.

One of the most notable features of the P8701CFCHEC and P8700CFCHEC models is their advanced combustion technology. Designed to maximize efficiency, these stoves provide a clean and efficient burn, minimizing emissions and maximizing heat output. This ensures not only a warm environment but also compliance with contemporary environmental standards. The combustion system is engineered to enhance air circulation within the firebox, which promotes a more complete burn of the fuel, resulting in reduced fuel consumption.

Both models come with a contemporary yet adaptable aesthetic, allowing them to seamlessly fit into a variety of interior design styles. Their sleek faces and clean lines add a touch of modern sophistication, making them suitable for both traditional and contemporary homes. The large glass windows patented by Stovax provide an expansive view of the flickering flames, creating a cozy atmosphere while also serving as a focal point in any room.

In terms of versatility, the P8701CFCHEC and P8700CFCHEC models allow for multiple installation options. They can be fitted into existing fireplaces or used as stand-alone units, catering to different homeowner preferences. Additionally, they can be used with various flue systems, enhancing their adaptability to different living spaces.

Further elevating the user experience, these stoves are designed with easy-to-use controls that allow for precise adjustment of the heat output, making it easy to maintain a comfortable living environment. The built-in air wash system helps keep the glass clean, ensuring that users can enjoy uninterrupted views of the fire without the hassle of frequent maintenance.

In conclusion, the Stovax P8701CFCHEC and P8700CFCHEC models, along with their variants, represent a fusion of classic wood-burning technology with contemporary design and unparalleled efficiency. They are perfect choices for anyone looking to enhance their home heating solution while also adding a touch of style and comfort.
Top Page Image Contents