Multi Tech Equipment MLT20DCA6 operation manual TOWIng saFeTY

Page 8

Safety Information

TOWIng saFeTY

CauTIOn

„Check with your local county or state safety towing regulations, in addition to meeting

Department of Transportation (DOT) SafetyTowing Regulations, before towing your light tower.

„In order to reduce the possibility of an accident while transporting the light tower on public roads, aLWaYs make sure the trailer that supports the light tower and the towing vehicle are mechanically sound and in good operating condition.

„aLWaYs shutdown engine before transporting.

„Make sure the hitch and coupling of the towing vehicle are rated equal to, or greater than the trailer “gross vehicle weight rating.”

„aLWaYs inspect the hitch and coupling for wear. neveR tow a trailer with defective hitches, couplings, chains, etc.

„Check the tire air pressure on both towing vehicle and trailer. Trailer tires should be inflated to 50 psi cold. Also check the tire tread wear on both vehicles.

„aLWaYs make sure the trailer is equipped with a safety chain.

„aLWaYs properly attach trailer’s safety chains to towing vehicle.

„aLWaYs make sure the vehicle and trailer directional, backup, brake and trailer lights are connected and working properly.

„DOT Requirements include the following:

•Connect and test electric brake operation.

•Secure portable power cables in cable tray with tie wraps.

„The maximum speed for highway towing is 55 MpH unless posted otherwise. Recommended off-road towing is not to exceed 15 MpH or less depending on type of terrain.

„Avoid sudden stops and starts.This can cause skidding, or jack-knifi ng. Smooth, gradual starts and stops will improve towing.

„Avoid sharp turns to prevent rolling.

„Trailer should be adjusted to a level position at all times when towing.

„Raise and lock trailer wheel stand in up position when towing.

„Place chock blocks underneath wheel to prevent rolling while parked.

„Place support blocks underneath the trailer’s bumper to prevent tipping while parked.

„Use the trailer’s swivel jack to adjust the trailer height to a level position while parked.

page 8 — MLT20 sERIES LIGHT TOWER • operation manual — rev. #0 (01/18/13)

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Models Proposition 65 warning Reporting Safety Defects NhtsaTable of Contents Specifications are subject to change without noticeSafety Information SaFeTY MessagesSaFeTY sYMBOLs Addresses practices not related to personal injuryGeneRaL saFeTY LIgHT TOWeR saFeTY LaMp saFeTYTOWIng saFeTY TRanspORTIng saFeTY Loading and Tie-Down on Flatbed TruckELeCTRICaL saFeTY „ neveR operate light towerGenerator/Engine Specifications MLT20 Series SpecificationsLight Tower Specifications Dimensions DimensionsReference Letter Description Dimension Length Mast Stowed Position Length Mast Deployed PositionGeneral information Metal Halide LampsComponents Major Components Control Panel SideCircuit Breakers Turn the lamps on and off Major Components Front/RearRead all safety instructions at the beginning of manual InspectionBefore starting Check all fastening nuts and bolts for tightnessContact between the two connectors Female and Male ConnectorOperation Starting the EngineMast operation Outriggers and Support StandsRaising the Mast Raising the Mast Lowering the MastStowing the Mast to Horizontal Position Rotating the MastVoltage Regulator Knob and AC Voltmeter Maintenance Generator/ENGINE MaintenanceCheck Cable Wear Servicing the Mast Raise/Lower Cable SystemServicing the Mast Extension Cable System Lower the mast to the horizontal resting positionMaintenance Trailers Manually Adjusting the BrakesTrailer Brakes Hydraulic BrakesAdjustable Channel Hydraulic Brake TroubleshootingWheel Hub Adjustment Leaf SuspensionTRaILeR TOWIng guIDeLInes Safety guidelines TrailersCOMMOn Causes for LOss of TRaILeR DRIvIng COnDITIOns COupLIng to THe TOW veHICLeTRaILeR vIn Tag InOpeRaBLe BRaKes, LIgHTs or MIRRORsTRaILeR TOWIng TIps ELeCTRICaL COnneCTOR TOW veHICLeSuspensIOn sYsTeM BRaKe COnTROLLeRSaFeTY CHaIns TRaILeR LIgHTIng anD BRaKIng COnneCTORBReaKaWaY sYsTeM JaCKsTanDCoupling the Trailer to the Tow vehicle Ball Coupler Lock washer and hitch frameTrailer tongue. Wood or concrete blocks may also be used Breakaway Cable surge Brake system Attaching safety ChainBreakaway Brake system Connecting Trailer Lights Uncoupling the Ball HitchPInTLe Hitch COupLeR Pintle Coupler and pintle HookFigure H. Attaching Safety Chain Pintle Hitch Coupling Trailer to Tow vehicle pintle CouplerBe sure lug nuts are tight before each tow TIRe saFeTY Unsafe Tires, Lug nuts or WheelsDetermining Load Limit of Trailer Step Determining Load Limit of Tow vehicle stepLetter Rating Speed Rating TIRe FunDaMenTaLsTable a. speed Rating Tire safety Tips Tire RepairReplacing Worn or Damaged Tires Uniform Tire Quality grading standards uTQgsTable B. Tire Wear Troubleshooting Wheel RimsWheels, Bearings and Lug nuts Lug nut Torque RequirementsLights and signals Table C. Tire Torque RequirementsLamp Troubleshooting Symptom Possible Cause SolutionWhen switch is first Checking voltage and ballast Turned on Replacement minimizes color differencesClean fixture Lamp starts slowly ARC does not strike Defective Lamp?Lamp Troubleshooting Guide ConnectionsStarting Ballast RemovalPage Reference MLT20DCA 4-lamp wiring diagram on succeeding pages Electronic Component Locator mlt20dcaElectronic Component Locator mlt20dca6 Wiring Diagram mlt20dca TB1 N Wiring Diagram mlt20dca6 TB1 Z HERE’S HOW to GET Help

MLT20DCA6, MLT20DCA specifications

The Multi Tech Equipment MLT20DCA and MLT20DCA6 stand out in the realm of compact construction machinery, renowned for their versatility and efficiency. These models are designed to meet the demanding needs of various industries, including construction, landscaping, and agricultural operations.

One of the key features of the MLT20DCA series is its powerful and reliable engine. Equipped with a robust diesel engine, these machines deliver optimal performance and fuel efficiency, ensuring that operators can complete tasks quickly and economically. This powertrain is complemented by a highly responsive hydraulic system, which allows for seamless operation of attachments such as buckets, forks, and augers.

The ergonomic design of the MLT20DCA and MLT20DCA6 enhances operator comfort and productivity. The spacious cabin is equipped with intuitive controls and offers excellent visibility, making it easier for operators to navigate tight spaces and perform intricate tasks. The low center of gravity provides stability and balance, which is essential when working on uneven terrain.

Both models feature a compact design, making them ideal for urban environments and confined job sites. Their versatile lifting capabilities allow them to handle a wide range of materials, from heavy loads to delicate items, making them invaluable in various applications. The MLT20DCA6 variant offers additional lifting height and capacity, catering to heavier-duty operations.

Safety is a paramount concern in equipment design, and the MLT20DCA series does not disappoint. These machines are equipped with multiple safety features, including reinforced ROPS (Roll Over Protective Structure), safety interlocks, and improved braking systems. This ensures the well-being of operators and those working in proximity.

In terms of technology, Multi Tech has integrated advanced control systems into both models. This includes automated diagnostics that monitor machine performance and alert users to potential issues before they become significant problems. Connectivity features also allow for remote monitoring, enhancing fleet management capabilities.

In summary, the Multi Tech Equipment MLT20DCA and MLT20DCA6 represent a formidable option for professionals seeking reliable and efficient compact machinery. With their powerhouse engines, user-friendly design, and advanced safety and technology features, these machines are poised to enhance productivity across various applications, ensuring a strong return on investment for operators.
Top Page Image Contents