Installation, What Happens When the Alarm Goes OFF?

places, in places with a higher than average air flow (near ventilation, open windows), near metal and in places where the temperature is below 5°C or above 37°C.

7 INSTALLATION

Please follow these steps to install the Marmitek smoke detector:

•In each of the keyhole slots, draw a mark on the wall or ceiling to locate a mounting plug and screw.

•Drill two holes at the marks and insert plastic wall plugs. Ensure that the detector does not get any plaster dust on it when you drill the holes for mounting.

•Attach the bracket to the wall using the two screws and plastic wall plugs (supplied).

•Line up the slot of the bracket and the detector. Push the detector onto the mounting bracket and turn it clockwise to fix it into place. Pull outward on the detector to make sure it is securely attached to the mounting bracket.

8 WHAT HAPPENS WHEN THE ALARM GOES OFF?

In the event of a fire, the smoke alarm will send an alarm signal to the Marmitek security system. It does not matter if the console is armed or disarmed. The alarm will work in both instances.

The security system will call the pre-programmed telephone numbers, the alarm will go off (with or without a siren, depending on the settings) and the lights will be turned on (this will not occur with HomeGuard).

You can test the system by keeping the Test button on the smoke alarm (1) pressed for more than 5 seconds.

9 CHANGING THE BATTERY

When the battery is almost empty, the SD90 will emit a short beep every 30 seconds. If this occurs, immediately replace the battery. If you fail to do this, there is a risk that there will be no signal in case of a fire. The SD90 settings will not be affected when changing the battery.

IMPORTANT: AFTER CHANGING THE BATTERY, PRESS THE RESET BUTTON ONCE To ACTIVATE THE SMOKE ALARM!

10 RESET TO THE FACTORY SETTINGS

If the SD90 smoke alarm does not function as you expected, or if you made a mistake during programming, it is possible to reset the smoke alarm to the original factory settings. Follow these instructions to reset the SD90:

1.Keep the Test button pressed (1) and press the Reset button (4) for a short period. The yellow LED (5) will light up.

2.Let go of the Test button. The yellow LED will go out. Wait 3 seconds and go to step 3.

3.Press the Test button once. The yellow LED will light up when you press the Test button. Let go of the Test button.

4.Wait until the yellow LED starts blinking again.

5.Press the Test button once more. The yellow LED will light up when you press the Test button.

6.Wait 20 seconds. The yellow LED will light up a number of times during the 20 seconds.

7.The smoke alarm has now been reset to the factory settings.

☺For an extra check you can press the Reset button once. The yellow LED should blink twice.

6	© MARMITEK

SD90 specifications

The Marmitek SD90 is a cutting-edge multimedia device designed to enhance your home entertainment experience. This innovative product combines advanced technologies and user-friendly features, making it a valuable addition to any modern media setup.

One of the SD90's main features is its ability to transmit high-definition audio and video signals wirelessly. With support for 4K resolution, the device ensures that users can enjoy crystal-clear images and immersive sound without the clutter of cables. Additionally, it utilizes the latest wireless technology to deliver low-latency performance, making it suitable for gaming and fast-paced action scenes.

Another standout characteristic of the SD90 is its compatibility with various HDMI devices. Users can easily connect it to a wide range of sources, including Blu-ray players, gaming consoles, and streaming devices. This versatility allows for seamless integration into existing home theater systems, enabling users to switch between different devices effortlessly.

The SD90 also boasts support for a variety of audio formats, including Dolby Digital and DTS. This ensures that users can enjoy a rich and immersive sound experience, enhancing their overall viewing pleasure. The device features advanced audio processing capabilities, which help to optimize sound quality, providing users with a cinematic experience right in their living rooms.

Moreover, the Marmitek SD90 includes a user-friendly interface that simplifies operation. Its remote control is intuitive and designed for ease of use, enabling users to navigate through settings and connections without hassle. The device also supports wireless connectivity protocols like Wi-Fi and Bluetooth, allowing users to connect their smartphones or tablets effortlessly for streaming purposes.

To ensure stable performance, the SD90 incorporates advanced signal processing technology. This helps prevent interference and dropouts, guaranteeing a reliable connection even in environments with multiple wireless devices. The device is also designed with energy efficiency in mind, boasting low power consumption, making it an eco-friendly choice for users.

In conclusion, the Marmitek SD90 stands out as a versatile and high-performance multimedia device. Its support for 4K video, rich audio formats, and seamless connectivity features make it an excellent choice for enhancing home entertainment setups. With its user-friendly design and advanced technologies, the SD90 is well-suited for anyone looking to elevate their viewing experience.