JVC CA-HXZ7V Recording on a Tape, To record on both sides-ReverseMode, English, On the unit

Recording	Continued
IMPORTANT:	Recording on a Tape

•It may be unlawful to record or play back copyrighted

English

material without the consent of the copyright owner.

•The recording level is automatically set correctly, so it is not affected by the VOLUME, the ACTIVE BASS EX. (For CA-HXZ7V), SUBWOOFER LEVEL (For CA-HXZ9V), and the SOUND MODE controls. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.

•If there are excessive noise or static in the recording you have made, the unit may be too close to a TV. Increase the distance between the TV and the unit.

•You can use type I tape for recording.

1 Press 0EJECT and insert a recordable cassette with the exposed part of the tape down.

To protect your recording Cassettes have two small tabs

on the back to protect from unexpected erasure or re- recording.

To protect your recording, remove these tabs.

To re-record on a protected tape, cover the holes with adhesive tape.

To keep the best recording and playback sound quality

If the heads, capstans, and pinch rollers of the cassette deck become dirty, the following will occur:

•Impaired sound quality

•Discontinuous sound

•Fading

•Incomplete erasure

•Difficulty in recording

To clean the heads, capstans, and pinch rollers

Use a cotton swab moistened with alcohol.

Pinch rollers

Capstans

Heads

To demagnetize the heads

Turn off the unit, and use a head demagnetizer (available at electronics and audio shops).

2 Close the cassette holder gently.

•If you want to record on both sides of a tape, see “To record on both sides—Reverse Mode.”

3 Check the tape direction of the cassette deck.

•If the tape direction is not correct, press TAPE2 3 twice then 7 to change the tape direction.

4 Start playing the source—FM, AM, CD player or auxiliary equipment connected to AUX jacks.

•When the source is the CD player, you can also use the button on the remote control. Direct Recording—(see page 27), and Auto Edit Recording (only for audio CDs)—(see page 27).

5	Start recording.	REC START
		/ STOP

On the unit:

Press REC START/STOP.

On the remote control:

Press and hold REC START/

STOP for more than 1 second.

The REC (recording) lamp flashes when

recording starts, and the tape direction indicator (3 or 2) starts flashing slowly.

•If no cassette is inserted, “NO TAPE” appears on the display. If a protected tape is inserted, “NO REC” appears on the display.

To stop recording immediately, press REC START/STOP on the unit or 7 (or press and hold REC START/STOP on the remote control for more than 1 second).

To remove the cassette, press 0 EJECT to open the cassette holder while the tape is not running.

To record on both sides—Reverse Mode

On the unit ONLY:

REVERSE

Press REVERSE MODE so that the Reverse Mode		MODE
indicator lights up on the display like—	.

•When using the Reverse Mode for recording, start recording in the forward (3) direction first. Otherwise, recording will stop when only one side (reverse) of the tape is recorded.

To cancel Reverse Mode, press the button again so that the

Reverse Mode indicator lights up on the display like— .

– 26 –