Hunter Fan 82043 manual C5C6, 43045-01 10/15/2009

Page 10

C2

OR

Pop out a wiring access slug.

C3

C4

	5/8	5/8
		1/2
	1/2

Slide the mounting rails into brackets.	Using the depth markings on the housing, position the
	bottom edge of the housing so that it will be flush with the
	sheetrock.

C5C6

Mark position of screws by using holes as a template.

Drill a pilot hole at the TOP of each outline, AS SHOWN.

10

43045-01 10/15/2009

Image 10

Contents 43045-01 110/15/2009 R n i n g 43045-01 210/15/200943045-01 310/15/2009 Before Installation 43045-01 410/15/200943045-01 510/15/2009 Section a New Construction attaching to joist 43045 10/15/2009Section B New Construction suspended between joists 43045-01 710/15/200943045 01 10/15/2009 16 bit910/15/2009 Section C Existing Construction accessible from aboveB10 B11 43045-01C5C6 43045-01 10/15/2009C9C10 C12Section D Existing Construction accessible from below D1 D243045-01 10/15/2009 Section E Final Installation 43045-01 10/15/2009 E12 Maintenance Preventative MaintenanceTrouble Shooting Trouble Shooting Warranty Limited Warranty