Hunter Fan 82040, 82041, 82042 manual Preventative Maintenance, Trouble Shooting

Page 17

Preventative Maintenance

A clean fan provides better service. Disconnect the power supply and clean the fan as listed below.

TO CLEAN THE BEZEL: Carefully pull the bezel down. Use water, a mild detergent such as dishwashing liquid, and a soft cloth to clean the bezel. DO NOT use abrasive cloths, steel wool pads, or scouring powders. Dry the bezel and reinstall it.

TO CLEAN THE FAN ASSEMBLY: Disconnect power to the unit by switching off the breaker or removing the fuse. Turn the wall switch off. Remove the bezel (as described above). Remove the two fan mounting screws. Remove the fan from the housing and unplug the fan wiring harness.

Gently vacuum the fan, motor, and the housing interior.

When the fan is clean, plug in the fan wiring harness. Reinstall the fan and tighten the two fan mounting screws. Reinstall the bezel.

Restore power to the appliance. Test the appliance. If the fan does not run, 1) check the power source, or 2) dis- connect power to the appliance, disassemble as described above, check the fan assembly plug, restore power, and test the unit. If the fan still does not run, contact a qualified installer.

NEVER IMMERSE METAL OR ELECTRICAL COMPONENTS IN WATER.

Maintenance

The fan motor is permanently lubricated and never needs oiling. If the motor bearings are making excessive or unusual noises, contact Hunter Technical Support (see Troubleshooting section) to order a new fan assembly.

Trouble Shooting

Problem: Fan does not come on.

Solution:

Turn power on, replace fuse, or reset breaker.

Hunter Fan Bath Ventilators are extremely quiet. To confirm that the fan is running, place your hand near the vents to feel the air movement.

Check all plug connections to be sure they are secure.

Check the wiring to make sure it matches the wiring diagram.

Problem: Light does not come on.

Solution:

Replace the light bulb with a new bulb.

Turn power on, replace fuse, or reset breaker.

Check all plug connections to be sure they are secure.

Check the wiring to make sure it matches the wiring diagram.

Problem: Fan is noisy.

Solution:

Check and tighten all fasteners.

Check the bezel to make sure it is secure.

Check the flapper to make sure it moves freely.

17

42936-01 10/17/2007

Image 17
Contents Read and Save These Instructions R n i n g Page X6 a Before Installation42936-01 10/17/2007 Section a New Construction attaching to joist Pop out a wiring access slugSection B New Construction suspended between joists Go to Section E Final Installation on16 bit B10 B11 Section C Existing Construction accessible from above16 bit C5C6Tighten screws C9C10D1 D2 Section D Existing Construction accessible from belowMove the housing into the ceiling Section E Final Installation E10 E14 Trouble Shooting Preventative MaintenanceMaintenance Limited Warranty Trouble Shooting WarrantyLEA y Guarde Estas Instrucciones V E R T E N C I a Page Antes de la instalación Retire el conjunto del ventilador del alojamiento Expulse un tapón metálico de acceso del cableado Sección a Construcción nueva fijación a la vigaSección B Construcción nueva suspendido entre vigas Vaya a la sección E Instalación Final en la página16 bit Sección C Construcción existente accesible desde arriba Usando las marcas de profundidad en el alojamiento C10 Sección D Construcción existente accesible desde abajo 1/2 Sección E Instalación Final Ubique la lámpara sobre los postes de montaje E13 Mantenimiento Solución de problemasGarantía Limitada Garantía

82040, 82042, 82041 specifications

The Hunter Fan 82042, 82040, and 82041 models are part of Hunter Fan Company's renowned line of ceiling fans, blending style, utility, and cutting-edge technology. These fans are designed to cater to a variety of spaces, offering reliable performance coupled with aesthetic appeal.

One of the standout features of these models is their WhisperWind motor technology. This innovation ensures that the fans operate quietly, making them ideal for bedrooms, living rooms, or any space where tranquility is essential. Despite the silent operation, the motors provide robust airflow, allowing users to enjoy a cool breeze even on warm days.

Each of these models offers a distinctive design that complements various décor styles. The 82042 model, for instance, is characterized by its classic design with clean lines and a polished finish, making it suitable for traditional or contemporary spaces alike. Meanwhile, the 82040 model showcases a more modern aesthetic, featuring sleek blades and a contemporary color palette, appealing to those who favor minimalist designs. The 82041, on the other hand, combines vintage charm with modern functionality, ideal for farmhouse-style interiors.

Another impressive feature of these ceiling fans is their energy efficiency. All three models are designed to consume less energy than conventional fans, helping users reduce their utility bills while contributing to environmental sustainability. They often come equipped with energy-efficient LED lighting, providing bright illumination without excessive energy consumption.

Installation and maintenance are hassle-free with these models, thanks to their user-friendly design. They come with a convenient mounting system that allows for easy installation, and the blades can be easily cleaned to maintain their appearance and performance over time.

In terms of versatility, the Hunter Fan 82042, 82040, and 82041 can be seamlessly integrated into various indoor environments. They are suitable for both standard and sloped ceilings, and many models come with multiple speed settings and remote control options. This allows users to customize their comfort level according to their preferences.

In summary, the Hunter Fan 82042, 82040, and 82041 models are exceptional choices for anyone seeking a blend of aesthetics, functionality, and advanced technology in their ceiling fans. With silent operation, energy efficiency, and elegant designs, these fans stand out in the market, catering to a diverse array of interior styles and personal preferences.