troubleshooting
CHECKLIST BEFORE SVC CALLS
Symptom |
| Checklist |
|
| Measure to Take |
| |
Vacuum cleaning | • | Is the dust bin assembled? | • Install the dust bin. |
| |||
robot does not | • | Is the Power Switch turned on? | • Turn on the Power Switch. |
| |||
operate at all before |
| ||||||
|
|
|
|
|
|
| |
cleaning. | • | Is cleaning mode | in the display | • | Press the | button. (To turn it | |
|
| panel turned on? |
|
| off, press and hold the | button | |
|
|
|
|
| down for 3 seconds or longer.) | ||
| • | Is the battery level fl ashing only | • Lift up the vacuum cleaning robot, | ||||
|
| one level and is ‘Lo’ displayed in |
| and manually dock the vacuum | |||
|
| the display panel? |
|
| cleaning robot onto the charger to | ||
|
|
|
|
| charge it. |
|
|
| • | Vacuum cleaning robot will not | • Replace the batteries in the remote | ||||
|
| operate when the battery in the |
| control. (AAA type) |
| ||
|
| remote control is depleted. |
|
|
|
| |
Vacuum cleaning | • | Is the battery level fl ashing only | • Lift up the vacuum cleaning robot, | ||||
robot stopped |
| one level and is ‘Lo’ displayed in |
| manually dock the robot onto the | |||
operating while |
| the display panel? |
|
| charger to charge it. |
| |
cleaning. | • | Has the vacuum cleaning robot | • Turn off the Power Switch and | ||||
| |||||||
|
| become hooked on wires on the |
| remove the wires. |
| ||
|
| fl oor? |
|
|
|
|
|
| • | Is the vacuum cleaning robot stuck | • Turn off the Power Switch and | ||||
|
| to the fl oor where there is a height |
| move the cleaning vacuum |
| ||
|
| difference? |
|
| cleaning robot to another place to | ||
| - | The driving wheel is lifted. |
| clean. |
|
| |
| • | Is there a thin towel (cloth) | • Turn off the Power Switch and | ||||
|
| wrapped around the driving wheel? |
| remove the thin towel. |
| ||
| • | Is the vacuum cleaning robot stuck | • Turn off the Power Switch and | ||||
|
| on the doorsill? |
|
| move the vacuum cleaning robot | ||
|
|
|
|
| to another place to clean. |
| |
The suction power is | • | Check whether the dust bin is full | • Stop the vacuum cleaning robot | ||||
weak while cleaning. |
| of dust. |
|
| and empty the dust bin. |
| |
| • | Check whether the suction inlet is | • Turn off the Power Switch and | ||||
|
| clogged by foreign substances. |
| remove the foreign substances on | |||
|
|
|
|
| the suction inlet. |
| |
| • | Check whether the fi lter is clogged. | • | Clean the fi lter well. |
| ||
05 TROUBLESHOOTING
troubleshooting _47
