Symptom | Checklist |
| Measure to Take | |
|
|
| ||
The vacuum cleaning | • Check whether the autoemptier | • Turn on the power switch on the | ||
robot frequently |
|
| left side of the autoemptier. | |
collides with the |
|
|
| |
| • Plug the power plug into the outlet. | |||
autoemptier. |
| |||
|
|
| ||
|
|
|
| |
The | • Check whether there is a foreign | • | Clean the fi lter. | |
does not empty | substance on the fi lter. |
|
| |
the dustbin |
|
|
| |
• Check whether there is a foreign | • Remove the foreign substance | |||
automatically. | ||||
substance inside the dustbin. |
| from the inside of the dustbin. | ||
|
| |||
|
|
| ||
| • The bottom of the autoemptier is | • Open the bottom of the auto- | ||
| clogged. |
| emptier using a coin and then | |
|
|
| remove the dust clogging it. | |
|
|
| ||
| • Check whether the dustbin | • Close the dustbin cyclone cap. | ||
| cyclone cap exists. |
|
| |
|
|
| ||
| • Check whether the auto empty | • Press the Auto Empty On/Off | ||
| lamp of the |
| Select button on the | |
| on. |
|
| |
|
|
| ||
| • Check whether the dustbin is | • Turn off the | ||
| separated from the autoemptier. |
| insert the dustbin fully until it is | |
|
|
| mounted completely. | |
|
|
| ||
| • Check whether the fi lter is | • Turn off the | ||
| separated from the autoemptier |
| mount the fi lter onto the dustbin. | |
| dustbin. |
|
| |
|
|
| ||
| • Check whether the Power | • Remove any foreign substances | ||
| Brush wrapped in any foreign |
| such as long hairs or strings | |
| substances. |
| wrapped around the power brush. | |
|
|
|
| |
The suction power of | • Check whether the Full lamp is | • | Empty the dustbin. | |
the | turned on. | • Clean the air inlet of bottom. | ||
week. |
|
|
| |
• Check whether the air inlet is | • Remove the foreign substance | |||
| ||||
| clogged by a foreign substance. |
| from the air inlet. | |
|
|
|
| |
| • Check whether dust has collected | • | Clean the fi lter. | |
| on the fi lter. |
|
| |
|
|
| ||
| • Check whether dust or hairs have | • Open the cyclone cap and then | ||
| collected on the cyclone. |
| remove any dust and hair. | |
|
|
| ||
The vacuum cleaning | • Check whether there is a foreign | • Remove the foreign substance | ||
robot is not charged. | substance on the charging |
| from the charging terminals. | |
| terminals. |
| Turn on the power switch of the | |
|
|
| ||
|
|
|
| |
| • Check whether the autoemptier is |
|
| |
| turned on. |
|
| |
|
|
|
| |
05 TROUBLESHOOTING
troubleshooting _49
