Spot Cleaning
You can conveniently clean a specific area that has a a lot of cookie crumbs, dust, and etc.
■ Move the vacuum cleaning robot to the location where you want to perform a spot clean.
About 1.5m
About 1.5m
03 OPERATING
Main unit button | Remote control | Configuration | |
button | Sequence | ||
| |||
| 1. | Set the mode. | |
▶ |
|
| |
2time |
|
| |
| 2. | Cancel the mode. |
Normal Mode
-In Spot cleaning mode, the vacuum cleaning robot cleans an area with a length of 1.5m and a width of 1.5m.
-When cleaning is completed, the vacuum cleaning robot will display End, Stop, and Stand by.
When the vacuum cleaning robot is docked with the charger NOTE station, spot cleaning is not supported.
• Each time you press the Turbo button, the Turbo icon on
CAUTION the display panel is turned on or off sequentially. When the Turbo icon is turned on, you can start cleaning in Turbo
mode.
•Each time you press the Dust Sensor button, the Dust Sensor icon on the display panel is turned on or off sequentially. When the Dust Sensor icon is turned on, you can start cleaning in Dust Sensor mode.
Turbo Mode
Dust Sensor Mode
Cleaning Complete
operating _31
