|
| Thank you | |
English | Thank you for purchasing the Jabra BT330 Bluetooth ® Headset. We hope you enjoy it! | ||
This instruction manual will get you started and ready to make the most of your headset. | |||
| |||
| ! | Remember, driving comes first, not the call! | |
Using a mobile phone while driving can distract you and increase the likelihood of an accident. If driving conditions demand it (such as bad weather, high traffic density, presence of children in the car, difficult road conditions), pull off the road and park before making or answering calls. Also, try to keep conversations short and do not make notes or read documents.
Always drive safely and follow local laws.
About your Jabra BT330
1.Answer/end button with blue indicator light
2.Volume control buttons
3.Charging connector
BEFORE USING YOUR HEADSET
The Jabra BT330 is designed for simple operation with a minimum number of control buttons. The answer and end buttons on the headset will provide alternative operation depending on the length of time they are pressed.
Instruction: | Duration of press: |
Tap | Press briefly |
Press | Approx: 1 second |
Press and hold | Approx: 5 seconds |
1 Check phone compatibility
The Jabra BT330 is compatible with most Bluetooth 1 (see Glossary) phones that are compliant with the Bluetooth version 1.1 or 1.2. Visit your phone manufacturer’s website or Jabra’s website (www.jabra.com) to make sure that your phone has Bluetooth capability.
2 Charge Jabra BT330
Your headset uses a rechargeable battery that must be charged fully before you use the headset for the first time.
1.Plug the AC charger into an electrical outlet and then into the headset’s charging connector. (See fig. 2)
2.Charge for 2 hours and then remove the AC charger from the headset.
3.Low battery is indicated by a flash every 5 seconds and 5 tones every 20 seconds.
WARNING: Do not attempt to charge the headset with anything other than the AC charger provided. Using another AC charger may damage or destroy the headset.
IMPORTANT: The headset cannot be used while charging.
3Read the Glossary
Read the glossary at the end of this document to familiarize yourself with important terms.
Once you have charged your Jabra BT330 you are ready to pair the headset with your mobile phone. If the headset has already been paired with your phone, then you can begin using it.
English
2 | 3 |