Technical Specifications

	CINEMA™ 100
Design	2-driver, 2-way acoustic suspension,
	stand-mounted / wall-mounted
Crossover(s)	2nd-order electro-acoustic
	at 1.8 kHz
High-Frequency Driver(s)	25-mm (1 in) S-PAL™satin-
	anodized pure-aluminum dome,
	ferro-fluid damped and cooled
Bass / Midrange Driver(s)	90-mm (3-1/2 in) mineral-filled
	polypropylene cone, 25-mm (1 in)
	high-temperature voice coil,
	oversize ceramic / ferrite magnets
Bass Driver(s)	n/a
Low-Frequency Extension*	85 Hz (DIN)
Frequency Response:
On-Axis	±2 dB from 125 Hz – 20 kHz
30˚ Off-Axis	±2 dB from 125 Hz – 15 kHz
Sensitivity – Room / Anechoic	88 dB / 85 dB
Suitable Amplifier Power Range	15 – 100 watts
Maximum Input Power†	50 watts
Impedance	Compatible with 8 ohms
Dimensions (h x w x d)	21.2 cm x 12.2 cm x 15.7 cm
	8-3/8 in x 4-13/16 in x 6-3/16 in
Weight (unpacked)	1.8 kg / 4.0 lb per speaker (with stand)
Finishes	Black Gloss

CINEMA™ 200

3-driver, 2-way LCR, acoustic suspension, on-wall with option to sit center speaker on a table or shelf with supports included

2nd-order electro-acoustic at 1.8 kHz

25-mm (1 in) S-PAL™satin- anodized pure-aluminum dome, ferro-fluid damped and cooled

Two 90-mm (3-1/2 in) mineral- filled polypropylene cones, 25-mm (1 in) high-temperature voice coil, oversize ceramic / ferrite magnets

n/a

80 Hz (DIN)

±2 dB from 120 Hz – 20 kHz ±2 dB from 120 Hz – 15 kHz

90 dB / 87 dB

15 – 150 watts

70 watts

Compatible with 8 ohms

50.5cm x 16.1 cm x 10.4 cm 19-7/8 in x 6-5/16 in x 4-1/16 in

3.7kg / 8.3 lb per speaker Black Gloss

TECHNICAL SPECIFICATIONS