![](/images/new-backgrounds/1159652/15965231x1.webp)
Using the voice command
You can control your headset using your voice. It only recognise English commands.
1.Turn on the voice prompt feature. To turn the voice prompt feature on or off, see page 12.
2.Press the Voice button while the headset is in Pairing or Standby mode. To enter the Pairing mode, see page 16.
3.Wait until the headset asks you to “Say a command”.
If you don’t say any command within 5 seconds, you will hear “Cancelled”. To reactivate the voice command, press the Voice button.
4.Say one of the following commands loudly and clearly.
Command | Action | |
|
| |
“Pair Active” | Enter Active pairing mode. | |
|
| |
“Pair Normal” | Enter Normal pairing mode. | |
|
| |
“Connection Status” | Find out if the headset is connected to a device | |
or not. | ||
| ||
|
|
14