Samsung DVD-VR325/XEF, DVD-VR325P manual Auto Setup, Then press the OK or √ button

Auto Setup

You do not need to preset the stations if you have already set them automatically (See Plug & Auto Setup on page 23).

Your DVD Recorder & VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done:

•Plug & Auto Setup (See page 23)

•Auto Setup

•Manual Setup (See pages 26~27)

	With the unit in Stop mode/No Disc mode, press
1 the MENU button.
	Press the …† buttons to select Setup, then press
2 the OK or √ button.
	Press the …† buttons to select Install, then press
3 the OK or √ button.
		No Disc		Install
		Programme Auto Setup		√
			Manual Setup	√
		Setup

MOVE OK RETURN EXIT

Press the …† buttons to select Auto Setup,
4 then press the OK or √ button.
	No Disc			Auto Setup
		Country Selection
	A	NL	S	PL
	B	I	CH	CZ
	DK	N	TR	Others
	FIN	P	GR
	D	E	HU
	MOVE	OK	RETURN	EXIT

•Refer to following abbreviation table when selecting “Country”.

A(Austria)	NL(Netherlands)	S(Sweden)	PL(Poland)
B(Belgium)	I(Italy)	CH(Swiss)	CZ(Czech)
DK(Denmark)	N(Norway)	TR(Turkey)	Others
FIN(Finland)	P(Portugal)	GR(Greece)
D(Deutschland)	E(Spain)	HU(Hungary)

5 Press the …† œ √ buttons to select your “Country”, then press the OK button.

The message “Your data will be lost. Press [OK] to continue, [MENU] to exit.” is displayed.

No Disc				Auto Setup
Programme		Auto Setup			√
					√
		Your data will be lost.
	Press [OK] to continue, [MENU] to exit.
MOVE		OK	RETURN	EXIT

6 Press the OK button to start the auto scanning.

•The DVD Recorder searches for the stations according to a preset preference list correspond- ing to the country that you have selected.

No Disc			Auto Setup
Programme
Setup	Please wait
	Scanning...		50%
		Stop
MOVE	OK	RETURN	EXIT

•The first frequency band is scanned and the first station found is displayed and stored.

And the DVD Recorder & VCR searches for the second station and so on.

•When the automatic scanning procedure has finished, the DVD Recorder & VCR switches automatically to programme 1.

•The number of stations automatically stored by the DVD Recorder & VCR depends on the number of stations that it has found.

7 If you wish to cancel the auto scanning before the end, press the OK button.

•The time and date are set automatically from the broadcast signal. If the signal is weak or ghosting occurs, the time and date may not be set automatically.

•Once the auto scanning procedure has finished, some stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required.

System Setup

English - 25