Samsung DVD-VR325P Using the ShowView Feature, Press the …† buttons to select ShowView, then

Using the ShowView

Feature

Before presetting your DVD Recorder & VCR:

•Switch on both the television and your DVD Recorder & VCR.

•Check that the date and time are correct. Up to twelve programmes can be preset.

	With the unit in Stop mode, press the MENU
	1 button.
	Press the …† buttons to select Programme, then
	2 press the OK or √ button.
	DVD-RAM(VR)			Programme
	Disc Navigation	ShowView		√
	Playlist	Standard Timer		√
	Disc Manager	ShowView Extended : Off √
	Copy
	Programme
	Setup
	MOVE	OK	RETURN	EXIT
ecordingR	Press the …† buttons to select ShowView, then
	3 press the OK or √ button.
	• A message is displayed to allow you to enter the
	ShowView code.
	DVD-RAM(VR)			ShowView
	Disc Navigation
	Playlist	Enter ShowView Code number. [0-9]
	Disc Manager
	Copy
	Programme
	Setup
		OK	RETURN	EXIT

4 Press the number buttons to enter the code of the programme that you want to record in your television magazine.

•If you want to correct the ShowView code that you are entering:

•Press the œ button until the digit to be corrected is cleared.

•Enter the correct digit.

5 Press the OK button.

• The information concerning the programme is displayed.

• When using the ShowView function for the first time with stored stations, the programme number flashes. This one time, you must enter the PR number manually by pressing the …† buttons.

DVD-RAM(VR)						Scheduled Record List
No.					No. 01					Edit
01										√
02	To	PR		Day	Start		End	Speed	V/P	√
03										√
04	DVD	07		SAT01	11:00		13:00	SP	Off	√
05				Recordable Time 01:23 SP						√
06										√
	MOVE			OK			RETURN		EXIT
DVD-RAM(VR)						Scheduled Record List
No.	To	PR		Day	Start		End	Speed	V/P	Edit
01 DVD		07		SAT01	11:00		13:00	SP	Off	√
02 DVD		01		SAT01	09:22		10:30	SP	Off	√
03	--	---	--/--		--:--		--:--	--	--	√
04	--	---	--/--		--:--		--:--	--	--	√
05	--	---	--/--		--:--		--:--	--	--	√
06	--	---	--/--		--:-- --:--			--	--	√
	MOVE			OK			RETURN		EXIT

6 If the programme and times are correct, press the OK button.

7 Turn the power off by pressing the STANDBY/ON button to activate the timer recoding setting.

8	Refer to pages 62~63 if you want to:
	• Check whether the timer Recording has set
	correctly or not.
	• Cancel a preset recording.
	■ The numbers next to each TV programme
	listing in the magazines or newspapers
Note
	are ShowView code numbers, which allow
	you to programme your DVD Recorder &
	VCR instantly with the remote control.
	Enter the ShowView code for the
	programme you wish to record.

■ShowView is a trademark of Gemstar Development Corporation. The ShowView system is manufactured under licence from Gemstar Development Corporation.

64 - English