Karaoke Functions

TIMER: ENTER RETURN

Note

-Depending on a file size, the amount of time between each picture may be different from the manual.

-If you don’t press any button, the slide show will start automatically in about 10 seconds by default.

MP3 - JPEG Playback

You can play JPEG using music as a backgound.

1. Press the	/	buttons to select an MP3 file in the clips
menu and then press the ENTER button.
2. Press the	/	buttons to select a JPEG file in the

clips menu and then press the ENTER button.

-Music will play from the beginning

3.Press Stop button when you want to stop the playback.

Note

MP3 and JPEG files have to be on the same disc.

CD-R JPEG Discs

-Only files with the “.jpg” and “.JPG” extensions can be played.

-If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.

-Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.

-The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters (. / = +).

-Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session disc, the disc can be played only up to the blank segment.

-A maximum of 3000 images can be stored on a single CD.

-Kodak Picture CDs are recommended.

-When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.

-Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.

-Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.

-Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.

-QSS Picture CD: The unit may not play QSS Picture CD.

-If the number of files in 1 Disc is over 500, only 500 JPEG files can be played.

-If the number of folders in 1 Disc is over 500, only JPEG files in 500 folders can be played

Karaoke Functions

Operation Sequence

1.Connect the Mixed Audio Out terminals with the TV or Amplifier. (see page 9 to 13)

2.Connect Mic into Mic jack. When a MIC is connected, the karaoke functions can be used.

Key Control

1.	Playback the Karaoke Disc containing the wanted songs.
	Press the KARAOKE button.
2.	Press the / buttons to change the desired tone.

Note

-If you hear feedback(squealing or howling) while using the karaoke feature, move the microphone away from the speakers or turn down the microphone volume or the speaker volume.

-When playing MP3, WMA, DTS and LPCM disc, the karaoke functions will not operate.

-When the MIC is connected, Digital Out does not work.

-If the MIC is connected in VCD 2.0, Playback is selected to Menu off mode automatically.

-The MIC sound outputs only from Analog Audio Out.

English