Samsung LH43PMFXTBC/EN manual External connection, Checkpoints, Cable Connection,  RS232C Cable

Page 21

Chapter 2. Device setup

External connection

Checkpoints

Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device.

Connect the sound ports correctly: left = white and right = red.

Check the types of ports at the back of the product you want to connect. The appearance may differ depending on the product.

WARNING

Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product.

Cable Connection

RS232C Cable

Interface

RS232C (9 pins)

 

 

Pin

TxD (No.2), RxD (No.3), GND (No.5)

 

 

Bit rate

9600 bps

 

 

Data bits

8 bit

 

 

Parity

None

 

 

Stop bit

1 bit

 

 

Flow control

None

 

 

Maximum length

15 m (only shielded type)

 

 

Pin assignment

1 2 3 4 5

6 7 8 9

Pin Signal

1Detect data carrier

2Received data

3Transmitted data

4Prepare data terminal

5Signal ground

6Prepare data set

7Send request

8Clear to send

9Ring indicator

RS232C cable

• Connector: 9-Pin D-Sub to Stereo Cable

61

9-P1- 5

21

3

2

1

-P2-

Image 21
Contents  PM32F-BC / PM55F-BC Table of contents Troubleshooting Symbols About this manualCopyright Safety Safety precautionsElectricity and safety Children may suffocate InstallationChildren may become injured or seriously harmed OperationProduct may fall and become damaged or cause an injury StoragePrecautions when handling the panel CleaningDevice setup InstallationWhat’s Included Remote sensor and spacer logo optional PartsPanel key Remote sensorSpacer logo optional Reverse sideRJ45 Port DescriptionPM55F-BCPM32F-BC Connecting the touch overlayTo lock an anti-theft locking device Anti-theft lockVOL Remote controlTo place batteries in the remote control Installation on a perpendicularwall Guided installationInstallation on an indented wall VentilationPreparing before installing wall mount Wall mount installationInstalling the wall mount Wall mount kit specifications VesaDevice setup Checkpoints External connectionCable Connection  RS232C CableLAN Cable Direct LAN cable PC to HUBCross LAN cable PC to PC Controlling Set control command Viewing control state Get control commandControl Codes ConnectionPower control CommandInput source control Volume controlSetting the input source Set Input Source Screen mode controlViewing screen status Get Screen Mode Status Setting the picture size Set Picture SizePIP On/Off control Screen size controlViewing the screen size Get Screen Size Status Viewing PIP on/off state Get the PIP ON/OFF StatusVideo Wall Mode Control Auto adjustment control PC and BNC onlySetting the video wall Set Video Wall Mode Safety LockViewing the safety lock state Get Safety Lock Status Full NaturalVideo Wall User Control Video Wall OnSet Number Data 0x01 0x02 0x63 100 0x64 10x10 Video Wall Model 1 ~Connection using a DVI cable Digital type Connection using a D-SUB cable Analog typePC connection Connection using an HDMI-DVI cable  Sound → set Hdmi Sound to Pcdvi System → General → set Hdmi Hot Plug to Off Connection using an Hdmi cable Connection using an DP cablePrecautions for using DP ‒‒ Sound → set Hdmi Sound to Avhdmi AV connectionAudio system connection Connection using an Hdmi cable up to 1080pSource selection LAN connectionSource EditInstallation/uninstallation UninstallationPC software Multiple Display Control Using the ethernet cable Using the RS-232C cableConnection using a direct LAN cable ConnectionConnection using a cross LAN cable Home screen Viewing contentPlayer Home → Player →File formats compatible with Player When content is runningControl buttons on the remote Available menuRestrictions Template files and LFD.lfd filesContents Video Power PointAudio ImageSupported in Network Channel and Local Channel Template filesSchedule URL Launcher SettingURL Launcher Clone ProductDevice ID ID SettingsDevice ID Auto Set PC Connection CableVideo Wall Network StatusVideo Wall Picture Mode On/Off TimerOn Timer Off Timer TickerHoliday Management Approving a connected device from the server Select Edit  Setup Select Time Zone Setting the current timeScreen adjustment MenuPicture When this setting is on, only UHD products are supported Auto Adjustment Film ModeImage Reset Hdmi Black LevelPicture Off Reset PictureTimer OnScreen display adjustmentOnScreen Display Immediate display2nd 3rd Description Language Set the menu language If Sound Output is set to External, Auto Volume is disabled Sound adjustmentSound Audio receiver. If this occurs, set the product to ExternalNetwork NetworkNetwork Connecting to a Wired Network Network Settings WiredManual Network Settings Wired Automatic Network Settings WiredHow to set up automatically How to set up manuallyNetwork Setting Wireless Connecting to a Wireless NetworkAutomatic Network Setup Wireless Manual Network Setup Wireless How to set up using WpspbcSelect Add Network System SystemMessage to On Power Control Auto Power OnEco Solution Energy Saving Mode Power ButtonNo Signal Power Off Auto Power Off2nd 3rd Description Security Safety Lock Reset System Game ModeCustom Logo Logo Display TimeAnynet+ HDMI-CEC Troubleshooting forAnynet+Anynet+ HDMI-CEC System menuProblem Possible Solution Anynet+ device Support SupportScreen Resolution TroubleshootingBefore you contact us DiagnosisInstallation issue PC mode Screen issue Not Optimum Mode is displayed Adjust Brightness and Contrast Go to Sound and change Sound Output to Internal Sound issueRemote control issue Touch function issueSource device issue Defined resolution is not supported. appears Other issueWhen booting the PC with the input source set to Frequently asked questionsSpecifications AppendixGeneral Plug-and-Play Model Name  PM32F-BC / PM55F-BC Synchronization Standard signal mode tableMAC, 640 x MAC, 832 xVESA, 1024 x VESA, 800 xVESA, 1152 x VESA, 1280 xProduct damage caused by customer’s fault Not a product defectOthers Optimum picture quality and afterimage burn-in prevention What is afterimage burn-in?Optimum picture quality Prevention of afterimage burn-inOZ348 2030 UA102 2110 Preventing afterimage burn-inOpen Source Licence Notice License
Related manuals
Manual 2 pages 15.38 Kb Manual 106 pages 22.27 Kb Manual 91 pages 29.93 Kb Manual 106 pages 58.74 Kb Manual 91 pages 55.7 Kb Manual 106 pages 12.52 Kb Manual 90 pages 13.27 Kb Manual 88 pages 28.77 Kb Manual 88 pages 21.33 Kb Manual 89 pages 20.7 Kb Manual 88 pages 23.54 Kb Manual 106 pages 7.27 Kb Manual 89 pages 3.88 Kb Manual 89 pages 44.4 Kb Manual 89 pages 17.43 Kb Manual 91 pages 33.7 Kb Manual 89 pages 41.36 Kb Manual 2 pages 37.97 Kb Manual 2 pages 31.66 Kb

LH32PMFXTBC/EN, LH43PMFXTBC/EN, LH55PMFXTBC/EN specifications

Samsung has long been a leader in the display technology market, and its latest series of professional displays, including the LH55PMFXTBC/EN, LH43PMFXTBC/EN, and LH32PMFXTBC/EN, continues to build on that legacy. These models are designed for various professional environments, providing cutting-edge technology and features that cater to the needs of businesses, retail spaces, and more.

Each model boasts a high-resolution display that ensures vivid image quality and exceptional clarity. The LH55PMFXTBC/EN features a 55-inch screen, making it ideal for medium to large spaces, while the 43-inch LH43PMFXTBC/EN and the compact 32-inch LH32PMFXTBC/EN are perfect for smaller venues or applications that require versatility. All three models support 4K UHD resolution, delivering sharp visuals that enhance any presentation or advertisement.

One of the standout technologies across this series is Samsung's Quantum Dot technology, which enhances color accuracy and brightness. This allows the displays to produce a wider color gamut, providing eye-catching visuals that attract attention. The ultra-wide viewing angles ensure that the content remains impactful, whether viewed directly or from the side.

Additionally, these models are designed with smart features, including Samsung's MagicINFO software. This platform enables users to easily manage and schedule content across multiple displays, making it perfect for digital signage applications. The displays also come with built-in Wi-Fi and support for various input sources, allowing for seamless integration with other devices.

Durability is also a key characteristic of the Samsung professional display series. These models are equipped with a robust design that ensures reliability in demanding environments. The displays are built to withstand 24/7 operation, making them suitable for continuous use in commercial settings.

Moreover, the energy-efficient design helps businesses reduce operational costs. By utilizing advanced power-saving technologies, these displays not only minimize energy consumption but also contribute to more sustainable practices.

In summary, the Samsung LH55PMFXTBC/EN, LH43PMFXTBC/EN, and LH32PMFXTBC/EN are exemplary choices for anyone looking to invest in professional display solutions. With their impressive resolution, vibrant colors, smart features, and durability, they stand out as some of the finest options available for enhancing visual communication in a variety of professional contexts.