●Event Log Display Window
-Click the Log button to activate the log display window.
-It displays the event(alarm, user connection, and setup change) occurring at
Note
[Event Message]
Connecting.. : Trying to connect to
Connected.. : Succeeded connecting to
Connection Failed : Failed in connecting to
Disconnected.. : Finished connecting to
Setup(Remote) :
Setup Start / End (Local) : Start/Finish the Menu screen at
Video Loss CH[N] : Video Loss at the N channel of
Alarm Detection CH[N] : Alarm issued at the N channel of
Motion Detection CH[N] : Motion detected at the N channel of
Time Change : Date/Time of
Load Factory Default :
Network Change :
System Shutdown :
Hdd Format :
Disk Full : No more space in
Power Failure Recovery :
Backup Start/End/Fail/Stop : Backup at
Network Traffic Busy : Data transport in the network is not smooth.
Access Denied(Limit Over) : Over connection.