3Connecting the USB
1.There are two USB connecting ports, on the front and other on the back of
2.USB Hard Disk, USB CD/DVD, and USB Memory may be connected through the front or through the back ports of
3.Only one USB device can be connected with each USB connecting port.
4.If the USB HDD is connected to the system, it should be detected and set through Menu - System - HDD setup before the operation.
5.Unit support HOT PLUG feature that allow the connection/removal of USB devices during the system operation.
Note
See 5-8 System (HDD Setup) of User’s Manual.
Caution
-USB port on the front and back of
-If you use the USB Memory on
Caution
- The hard disk of USB device should be set to Master.