Before Use
●User validation for entering the MENU window
Press the “MENU” key to enter the Menu Setup window. Select Menu out of Menu, Backup, and Shutdown in the Setup field. (You can also perform the Backup and Shutdown functions after this user validation checkup.) The ID is fixed to Admin because only the user with Admin privilege can enter the Menu window. Input the Admin password you have defined and select OK.
●Selection
The yellow cursor shows the current window. Use the ,,, key in the front to move the cursor to desired menu. If you press the “Enter” key with the cursor clicking on your desired menu, the system will enter the new mode.
Press the “Enter” key to finish the selection. On Drop Down Menu, use the or key to move the cursor on your desired menu.
●“OK” or “Cancel” in Menu Setup Window
Once changed, the new menu setup procedure will be finalized by pressing “OK”. Pressing “Cancel” will cancel the new setup and return to the upper menu.
●Front “MENU” and “SEARCH” Button
The MENU button or SEARCH button, if pressed first, acts as an entrance button.
Once entering, it reverses the page to the previous one. When the MENU button is pressed in any of the Setup menus, it changes to the upper menu. If you press the MENU button in Live mode, the password window appears for user validation.
●The “>” or “V” marked beside the title means the values of all channel in the page are copyed by the value of the chacked channel 1.
●The first page of the menu is structured as follows.