7Backup
Backup
●If there is a device, the free space and the backup device is displayed.
●Select a date, time, and camera No. to backup, and press “Start”.
●When you change Start Date/Time or End Date/Time, free space keeps updated in the Free Space zone. But the Select/Free values are displayed when you have marked the Check box.
●A file name is composed of Folder/File Name. A folder is composed of the backup date(YYYYMMDD) while a file name is composed of the time(HHMM). A file may be renamed by the virtual keyboard. A file name can composed of the maximum 4 letters.
●In case that more than one backup device is connected, click the box in the bottom of left corner to select a backup device.
●If there is no backup device, Warning sign pops up. For a USB HDD, in
●Press the “Stop” to stop the backup.
●Pressing Cancel during the Backup returns to the upper menu but this does not affect the backup process.
●For a
●In the case of the 2080/2082,
Caution
[In Backup Process]
Pressing THE “Cancel” returns to the upper menu but this does not affect Backup process. Press “Stop” to stop the backup. The speed of the set may down during the backup.
When backing up to USB CD/DVD or memory, you must use a smaller capacity than the device’s true capacity. (Part of the capacity is used for the system)
The file name is created with the start time of backup data. (YYYYMMDD)/(HHMM+ four digits of the serial number) The backup file can be separated in the following conditions:
-Different units in file size (1GB for DVD, 2GB for others)
-Change in recording conditions
-Discontinuous recording data
It doesn't support backing up with memory cards, flash cards, and memory sticks such as SD, CF, MMC, etc. Also, it doesn't support USB backup with the adapters of the devices listed above.
File name's virtual keyboard does not support special keys or the space bar.
When the CD or DVD is malfunctioning, the USB CD/DVD or
| Warning | |
| The backup data could be damaged by the state of writing surface of disk in the case of CD/DVD backup. | |
| Note | |
| - |
|
| - | In case of AVI backup, the backup playback is available in the PC, but it is not available in the DVR. |
|
| Codec is required to play an AVI backup file, which is also copied along with the installation file in the AVI backup |
|
| process. Run a codec setup file, “MP4Codec.exe”, to install the codec on the PC. "INDEX.xml" is included in the AVI |
|
| backup file, which enables you to check and enjoy a desired file at your convenient time. |
| - | In case of USB external HDD and USB Flash Memory, the backup is available only with formatting FAT32 partition. |
|
| To format FAT32, Format the device as FAT32 in the PC or erase the device in the Storage Setup menu, which enable |
|
| to backup files. |
- | In case of | |
English | devices with Samsung DVR can be obtained from your vendor. |