Samsung SCC-B5351GP, SCC-B5351P manual Cable connection, Installation

User Guide

■Cable connection

1.Connect the BNC cable to the video cable connector attached on the dome camera, and connect the remained BNC cable to the video input terminal of the monitor.

2.Connect the power adaptor at this time. Connect the DC 12V/AC 24V power cable of the connector to the power cable connection that is attached on the dome camera.

Monitor

BNC Cable

User Guide

■Installation

1.Select an installation location capable of bearing five times the weight of the product.

2.Fix the BRACKET to the location desired with the supplied SCREWs.

E

BRACKET

FIXING SCREW

3.Hold the CASE-BOTTOM of the camera with one hand and use the other hand to rotate the CASE-TOP approximately 20 degrees in the anti-clockwise direction to remove it.

CASE-TOP

CASE-BOTTOM

COVER-CEILING

Caution Make sure to hold the CASE-BOTTOM and not the COVER-CEILING part when rotating the CASE-TOP. Otherwise, the internal 360 -Rotation-Preventing system may get damaged.

8 9