2Connecting and Using a Source Device
Entering MagicInfo mode
1After installing and connecting the network box (sold separately) to the product, power on the product.
2
3
Press SOURCE on the remote control, and select MagicInfo.
Connecting the network box to the HDMI port on the product will change Source from HDMI to
MagicInfo.
Select the default application you want to run when MagicInfo starts.
MagicInfo Setup Wizard - v.1.12
Select Application - step 1
MagicInfo Pro (LAN, WAN based version)
Select Later
< Back(B) | Next(N) > | Finish | Cancel |
2 Connecting and Using a Source Device 61