10 MagicInfo Lite
10.2 Network Schedule
10.2.1 Connecting to a server
To use the MagicInfo Lite Server, the clock on the monitor must be set through the server (web).
To use local schedules and AutoPlay only, without using the MagicInfo Lite Server, the clock must be set using the remote control.
Network setup
To run MagicInfo Lite, connect to a network.
Refer to page 130 for details about the Network Settings menu.
Server setup
Go to MENU 
Network 
MagicInfo Lite Settings 
Server. Next, enter the server information.
(E.g.: http://192.168.0.10:7001/MagicInfo/)
MagicInfo Lite
Server | Access Periodically |
Server Address | 192.168.0.10 |
Port | 7001 |
Apply | Cancel |
Configuring the FTP mode and default storage space
Default Storage: Specify the location you want to save content (downloaded from the server) to.
Internal Memory: Save the content to the internal memory of the product.
USB memory: Save the content to USB memory.
If a network schedule is running when USB memory is not connected, the default content will
run.
10 MagicInfo Lite 166