Checking before use, Operation ranges | Samsung AQ09UGFX, AQ18UGAN

Samsung AQ09UGFX, AQ18UGAN, AQ24TSBXEUR, AQ18TSBN, AQ12UGFN Checking before use, Operation ranges

Page 6

Checking before use

Operation ranges

The table below indicates the temperature and humidity ranges the air conditioner can be operated within. Refer to the table for efficient use.

Mode	Indoor temperature	Outdoor temperature	Indoor humidity

Cooling	16˚C~32˚C	15˚C~43˚C	Relative humidity 80% or less

Dry	18˚C~32˚C	15˚C~43˚C	-

Heating	27˚C or less	-5˚C~24˚C	-

If the air conditioner operates in cooling mode for long period of time in high humidity area, dew may be formed.

If the outdoor temperature goes down to -5°C, heating capacity may decrease as much as 60%~70% of specified capacity according to the using conditions.

Maintaining your air conditioner

Internal protections via the unit control system

This internal protection operates if an internal fault occurs in the air conditioner.

	Type	Description

	Against cold air	The internal fan will be off to against cold air when the heat pump is heating.

	De-ice cycle	The internal fan will be off to against cold air when the heat pump is heating.

	Anti-protection of	The compressor will be off to protect internal battery when the air conditioner operates
	internal battery	in Cool mode.

	Protect compressor	The air conditioner does not start operating immediately to protect the compressor of
	Protect compressor	the outdoor unit after it has been started.
		the outdoor unit after it has been started.

• If the heat pump is operating in Heat mode, De-ice cycle is actuated to remove frost from an outdoor unit that may

have deposited at low temperatures.

The internal fan is switched off automatically and restarted only after the de-ice cycle is completed.

Boracay EUR_AQ09T&U@_IBIM_32447A_E.indd 6

2011-3-19 10:07:28

Image 6

Contents

Boracay EURAQ09T&U@IBIM32447AE.indd 2011-3-19 Contents Follow directions Safety precautionsImportant safety symbols and precautions Wall socketFor Using For Cleaning Checking before use Operation rangesMain parts  09/12/18/24T  PowerChecking the name of the parts Display  09/12/18/24TChecking the remote controller Remote controller buttonsStoring the remote controller Remote controller displayBattery changing time IndicatorBasic function Auto Auto Low Med HighLow Med High Press the Air swing button on the remote controller Adjusting the air flow directionUsing the Turbo function Vertical air flowMode When the air conditioner is on and in cool/heat modePress the button on the remote controller Press the Time Up or Time Down button to set the timeSetting the On/Off timer Press the On Timer/Off Timer buttonAdditional options available in On timer mode Using the Smart Saver function Combining On Timer and Off TimerUsing the Auto Clean function When the air conditioner is turned on09/12/18/24T 09/12/18/24U Cleaning the outdoor unit heat exchanger Cleaning the air conditionerCleaning the indoor unit Opening the panelOpen the panel and put the Air filter out Cleaning the air filterRemoving the Air filter Dry the Air filter in a ventilated areaMaintaining the air conditioner Periodical checksTroubleshooting Outdoor unit Heat exchanger during Heat mode in winter Flow movement changes. It is normalConnection General information Power supply line, fuse or circuit breaker Choosing the installation locationInstalling the unit  a place where the air filter can be replaced easilyWhere sulfide gas exists Outdoor UnitModel  Figure Description When installing more than 1 outdoor unitWhen the air outlet is towards the wall Top view Side viewAccessories Accessories in the indoor unit caseAccessories in the outdoor unit case Tools required for installation General Tools Fixing the installation plateOptional accessories Tools for test operationsConnecting the assembly cable Cable specificationConnecting the cable Each wire is labeled with the corresponding terminal number Smooth the cut edges Cut off the remaining foam insulationUnscrew the caps at the end of each pipe Purging the indoor unitCutting or extending the pipe Put a flare nut slightly into the pipe and modify the flareCracked Pipe 50 Pa. The joint must be accessible and serviceableCorrect Inclined Outer DiameterDrain hose installation Purging the connected pipes Connect a drain hose to the drain plugEnsure that condensation draining is adequate Adding Refrigerant Please fill in with indelible ink  the factory refrigerant charge of the product1975 To check for gas leaks on the indoor unit Performing the gas leak testsTo check for gas leaks on the outdoor unit Leak test with nitrogen before opening valvesThen place the indoor unit on the installation plate Fixing the indoor unit in placeFixing the outdoor unit in place Final Check and Trial Operation After tube contraction work is completed, wrap it with How to connect your extended power cablesApply heat to the contraction tube to contract it Insulation tape to finishMemo 70 70 19 42 277267864, € 0.07/min +381Air Conditioner

Related manuals

Samsung AQ09UGFX, AQ18UGAN, AQ24TSBXEUR, AQ18TSBN, AQ12UGFN Checking before use, Operation ranges

Checking before use

Operation ranges

Indoor humidity

Type

Description

in Cool mode.

the outdoor unit after it has been started.

Boracay EUR_AQ09T&U@_IBIM_32447A_E.indd 6