Samsung VP-MX25E/XER, VP-DX105/XEF Disc Unfinalise, 光盘取消终结, 屏幕上显示 Make the disc recordable? 要

DISC UNFINALISE ( ( )) 光盘取消终结 ( ( ))

•This function works only in the Record mode. page 21

•If a DVD-RW disc had been fi nalised in the VR mode or Video mode, you can unfi nalise the disc for further recording.

When unfi nalising, there should be enough power in the batteries. If the AC power adaptor is to be used, make sure that the jack is properly connected.

•此功能仅可在录制模式使用。 第 21 页

•如果在 VR 模式或 Video 模式下已经终结了 DVD-RW光盘， 为了方便继续录制，可以取消终结光盘。当取消终结时，应 该摄像机有足够的电量。如果使用交流电源适配器，请确保 适配器线缆与摄像机的接口连接正常。

1.Slide the POWER switch downwards to turn on the power. page 21

2.Set the Storage mode switch to DISC. (VP-DX103(i)/DX104/DX105(i) only) page 30

3.Press the MENU button, then move the Joystick right or left to select “Disc Manage.”

4.Move the Joystick up or down to select “Disc Unfinalise,” then press the Joystick.

•You can simply unfi nalise the disc using the FINALIZE button on the DVD camcorder.

•Disc information will appear.

5.Move the Joystick to select “Execute,” then press the Joystick.

•To exit, use the Joystick to select “Back,” the press the Joystick.

6.The message “Make the disc recordable?” will appear. Move the Joystick right or left to select “Yes,” then press the Joystick.

•The message showing that the disc is being unfi nalised will appear, and the disc will be unfi nalised.

STBY 0:00:00 [30 min]

Disc Manage

Disc Finalise

Disc Unfi nalise

Disc Format

Disc Info

Unfi nalise
Back	Execute
Disc Name	01/JAN/2008
Disc Type	DVD-RW [Finalised]
Disc Format	VR Mode
Used	0:10:00
Free	0:20:00 [Fine]
Now Unfi nalising...
Avoid Shock & Vibration

1.向下滑动 POWER 电源开关开启摄像机。  第 21 页

2.切换存储模式至 DISC( 仅限 VP-DX103(i)/ DX104/DX105(i))  第 30 页

3.按下 MENU 按钮，然后向右或向左移动操纵杆 选择 “Disc Manage”( 光盘管理 )。

4.向上或向下移动操纵杆选择 “Disc Unfinalise” ( 光盘取消终结 )，然后按操纵杆确认。

•您可以使用 DVD 摄像机上的 FINALIZE 按 钮轻松地执行光盘取消终结。

•屏幕上显示光盘信息。

5.移动操纵杆选择 “Execute”( 执行 ) 然后按操 纵杆确认。

•若想退出，使用操纵杆选择 “Back”( 返回 ) 然后按操纵杆确认。

6.屏幕上显示 “Make the disc recordable?”( 要

使光盘可录制和可编辑吗？ )。向右或向左移 动操纵杆选择 “Yes”( 是 )，然后按操纵杆确认。

•屏幕上显示光盘正在取消终结的提示信息， 并且光盘被取消终结。

•	The unfi nalise function is not available at the battery		•	在电池电量低 (	) 的时候，无法使用光盘取消终结
				功能。
	level under ( ).	警告
WARNING •			•	在取消终结期间，请不要击打或震动本 DVD 摄像机。
	During unfi nalising, do not cause impact or vibration to
	your DVD camcorder.			否则会导致 DVD 摄像机发生故障。

This could cause a malfunction.

49_ English 中文 _49