Samsung EC-NV7ZZBBC/DE Inserting the memory card, Insert the battery as shown, Chamber cover

Page 14

Connectinga to a Power Source

Insert the battery as shown

- If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ / -).

-Do not use force to open the battery chamber. This may damage the battery

chamber cover.

There are 4 indicators for battery condition that are displayed on the LCD monitor.

Battery

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery

The battery is

Low battery capacity

Low battery capacity

Low battery capacity

(Prepare to recharge

(Prepare to recharge

(Prepare to recharge

status

fully charged

or use spare battery)

or use spare battery)

or use spare battery)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Inserting the memory card

Turn off the camera's power before

inserting the memory card. - Insert the memory card as shown.

- Have the front of the memory card facing toward the back of the camera (LCD monitor) and the card pins toward

the front of the camera (Lens).

-Do not insert the memory card the

wrong way round. Doing so may damage the memory card slot.

Instructionsa on using the memory card

Be sure to format the memory card (see p.59) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera.

Turn off the camera power whenever the memory card is being inserted or removed.

Repeated use of the memory card will eventually reduce its performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty.

The memory card is an electronic precision device.

Do not bend, drop or subject it to any heavy impact.

Do not store the memory card in an environment with strong electronic or magnetic fields, e.g. near loudspeakers or TV receivers.

Please do not use or store in an environment where there are extremes in temperature.

Do not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth.

Please keep the memory card in its case when not in use.

During and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal.

Do not use a memory card that is used in another digital camera.

To use the memory card in this camera, format the memory card using this camera.

Do not use a memory card formatted by another digital camera or memory card reader.

13

Image 14
Contents English Thank you for buying a Samsung Digital Camera InstructionsUse this camera in the following order Camera’s internal components and could cause a fire Contents ISO FAQUSB DpofSystem chart Lens/ Lens cover Identification of featuresBuilt-in flash Zoom W button Thumbnail Zoom T button Digital zoom Bottom ASM mode Self-timer lamp Icon Status DescriptionTurns off when ready to take another picture ASR modeConnecting to a Power Source Text Sunset Dawn Backlight Fireworks BEACH&SNOWConnectinga to a Power Source Charging with the camera Charging LED Charging errorCharging is complete Turn off the cameras power before Insert the battery as shownBattery Indicator Inserting the memory cardStill Fine Normal30FPS 15FPS Riopla Menus will display When Using the Camera for the First Time Smart buttonSelected menu Left / right Setting up the language 000100/010000 LCD monitor indicatorImage & Full Status Description Icons Description IconsStarting the recording mode Select the A, S or M mode by using the smart buttonSmart button. p.39 Point the camera towards the subject Select the Aperture Priority mode By using the smart buttonSelect the Manual mode by using the smart button. p.39 Activate If the lighting condition is darker than Fluorescent lighting condition, camera shakeTo record a movie clip without voice Pressing the shutter button down half wayUsing the camera buttons to set the camera Shooting against the lightSubject will appear nearer Zoom until the minimum setting is reachedZoom W / T button Button will have no effectUsing the LCD monitor to set the camera MenuMetering Spot Colour toneFlash Fill EffectChanging the brightness BrightnessYou can change the brightness of the image Auto macro Selecting focus type FlashManual Focus MF Size Single Continuous shotMetering MultiSharpness Quality / Frame rate Save the image in negative modeEffect WhiteSelf-timer / Remote control Voice recording / Voice memo White balanceBalance Shutter button Using the Custom White BalanceAuto Exposure Lock AEL Exposure compensation Scene menuPhoto frame is not inserted Special Effect Photo FrameSpecial Effect Motion GIF Special Effect Composite shooting Selecting 2 composite shootingThis mode will set the aperture value for automatic exposure Shutter Speed Aperture ValueSelecting a play back mode Photo Gallery modeAlbum mode Images play back by album Press the Play mode button and menus as shown will displayPlaying back an album Press the slide show menu button Image Rotating an imageRotates the image clockwise Rotates the image anticlockwise Will display on the LCD and OPS functionStarting play mode Voice, press Button File name No The movie trimming will cancelTo stop playback of the voice, press the button Description Icon 100-0001Original full sized image Using the smart buttonPress the enlargement button Enlarged view by checking the imageStarting the slide show ONE PlayONE Protecting imagesDeleting images ALLDpof Index CancelDpof Print size ONE PICRotating an image ResizeRange of yellowish brown colours TrimmingMotion GIF PictBridge Connecting the Camera to a PrinterCustom Printing mode Easy Printing mode ShownSetting 100-0001Setup menu Printer buttonMain menu Sub menu LogoName will be set from 0001 even after Using the camera buttons except for the shutter buttonNew memory card is used, or after Memory card FullLanguage sub menu There is an option to include Date / Time on still imagesOff Date & Time will not be imprinted You can turn the Auto Focus lamp on and off Sub menus Sub menus Off The quick view function can’t be activatedSound sub menus Off, Sound 1, Sound 2, Sound You can select the shutter soundShutter sound Off, Sound 1, Sound 2, Sound Sub menus No The memory will not be formattedYes Movie output signal from the camera can be Ntsc or PALCancels Copy to Card Copied to the memory card afterIndicated on the LCD monitor Or AV channel of the TVImage may not display Not soundImportant notes Sand can be particularly troublesome to camerasImportant notes Please check the following Before contacting a service centreInsert a fully charged battery p.13 Images are unclear Turn the camera onSpecifications 1cm ~ 10cm Wide only180 Capacity 256MB MMC127 System Requirements Power Mac G3 or laterSoftware Notes About the softwareSetting up the application software Install the Digimax Master in the order shown Starting PC mode Connect the camera to your PC with the USB cable Connecting the camera to a PCDownloading stored images CutRemoving the removable disk Uninstallation is complete Setting up the USB Driver for MACUsing the USB Driver for MAC Digimax Master Downloaded images will be displayedImage viewer You can view the stored images FAQ Case SettingsWhen the movie clip doesn’t play back on the PC SystemCorrect Disposal of This Product Wastes at the end of its working lifeFCC notice Samsung Techwin6806-0143
Related manuals
Manual 82 pages 61.24 Kb Manual 82 pages 15.54 Kb Manual 82 pages 44.35 Kb Manual 82 pages 36.21 Kb Manual 82 pages 61.96 Kb Manual 82 pages 20.99 Kb Manual 82 pages 37.99 Kb Manual 82 pages 30.74 Kb