Samsung EC-NV7ZZBBA/PT, EC-NV7ZZBBC/DE manual Continuous shot, Metering, Single, Multi, Spot

Page 31

Continuous shot

You can select the type of shooting and the number of continuous shots.

- SINGLE

: Take one picture only

 

- CONTINUOUS : Images will be taken continuously

AEB

M. CAPTURE

 

until the shutter button is released.

 

HIGH SPEED

 

The shooting capacity depends on

CONTINUOUS

 

the memory.

SINGLE

 

7

- HIGH SPEED

: This takes 3 shots continuously

 

 

(2.5 shots per second) when the

 

 

shutter is pressed and held down.

[Still image mode]

- M. CAPTURE

: This takes 7.5 shots per second, when the shutter is pressed

 

and held down. After completing the continuous shooting,

 

images are saved and the images play back on the Rear

LCD. The maximum number of shots is 20 and the image size is fixed as 1024X768.

-AEB : Take three pictures in a series using different exposures: standard exposure, short exposure (-1/2EV) and over exposure (+1/2EV). Use this mode if it is hard to decide exposure of the object.

High resolution and picture quality increases file saving time, which increases stand-by time.

If the [CONTINUOUS], [HIGH SPEED], [M. CAPTURE] or [AEB] sub menu is selected, the flash is switched off automatically.

It is best to use a tripod for the AEB shooting as the time to save each image file is longer and blurring caused by camera shake may occur.

When the [M.CAPTURE] menu is selected, you only can select ISO 400, 800, 1000.

Metering

If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.

- MULTI

: Exposure will be calculated based on

 

 

an average of the available light in the

 

 

image area. However, the calculation

MULTI

 

SPOT

 

will be biased towards the centre of the

 

CENTER

 

image area. This is suitable for general

 

7

 

use.

 

- SPOT

: Only the rectangular area in the centre

[PROGRAM mode]

 

 

of the LCD monitor will be metered for

light. This is suitable when you want the subject in the centre correctly exposed, regardless of the back lighting.

-CENTER : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for taking a picture of small object like a flower or insects.

If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation.

30

Image 31
Contents English Use this camera in the following order InstructionsThank you for buying a Samsung Digital Camera Camera’s internal components and could cause a fire Contents Dpof FAQUSB ISOSystem chart Built-in flash Identification of featuresLens/ Lens cover Zoom W button Thumbnail Zoom T button Digital zoom Bottom ASR mode Self-timer lamp Icon Status DescriptionTurns off when ready to take another picture ASM modeText Sunset Dawn Backlight Fireworks BEACH&SNOW Connecting to a Power SourceConnectinga to a Power Source Charging is complete Charging errorCharging with the camera Charging LED Inserting the memory card Insert the battery as shownBattery Indicator Turn off the cameras power before30FPS 15FPS Fine NormalStill Riopla Selected menu Left / right When Using the Camera for the First Time Smart buttonMenus will display Setting up the language Description Icons LCD monitor indicatorImage & Full Status Description Icons 000100/010000Select the A, S or M mode by using the smart button Starting the recording modeSelect the Manual mode by using the smart button. p.39 Select the Aperture Priority mode By using the smart buttonSmart button. p.39 Point the camera towards the subject Fluorescent lighting condition, camera shake Activate If the lighting condition is darker thanPressing the shutter button down half way To record a movie clip without voiceShooting against the light Using the camera buttons to set the cameraButton will have no effect Zoom until the minimum setting is reachedZoom W / T button Subject will appear nearerMenu Using the LCD monitor to set the cameraEffect Colour toneFlash Fill Metering SpotYou can change the brightness of the image BrightnessChanging the brightness Manual Focus MF Selecting focus type FlashAuto macro Size Multi Continuous shotMetering SingleSharpness White Save the image in negative modeEffect Quality / Frame rateSelf-timer / Remote control White balance Voice recording / Voice memoAuto Exposure Lock AEL Using the Custom White BalanceBalance Shutter button Scene menu Exposure compensationSpecial Effect Motion GIF Special Effect Photo FramePhoto frame is not inserted Selecting 2 composite shooting Special Effect Composite shootingShutter Speed Aperture Value This mode will set the aperture value for automatic exposurePress the Play mode button and menus as shown will display Photo Gallery modeAlbum mode Images play back by album Selecting a play back modePlaying back an album Press the slide show menu button Will display on the LCD and OPS function Rotating an imageRotates the image clockwise Rotates the image anticlockwise ImageStarting play mode To stop playback of the voice, press the button File name No The movie trimming will cancelVoice, press Button 100-0001 Description IconEnlarged view by checking the image Using the smart buttonPress the enlargement button Original full sized imageONE Play Starting the slide showALL Protecting imagesDeleting images ONEONE PIC CancelDpof Print size Dpof IndexResize Rotating an imageMotion GIF TrimmingRange of yellowish brown colours Shown Connecting the Camera to a PrinterCustom Printing mode Easy Printing mode PictBridge100-0001 SettingPrinter button Setup menuLogo Main menu Sub menuMemory card Full Using the camera buttons except for the shutter buttonNew memory card is used, or after Name will be set from 0001 even afterOff Date & Time will not be imprinted There is an option to include Date / Time on still imagesLanguage sub menu Sub menus Off The quick view function can’t be activated You can turn the Auto Focus lamp on and off Sub menusSub menus No The memory will not be formatted You can select the shutter soundShutter sound Off, Sound 1, Sound 2, Sound Sound sub menus Off, Sound 1, Sound 2, SoundCopied to the memory card after Movie output signal from the camera can be Ntsc or PALCancels Copy to Card YesNot sound Or AV channel of the TVImage may not display Indicated on the LCD monitorSand can be particularly troublesome to cameras Important notesImportant notes Insert a fully charged battery p.13 Before contacting a service centrePlease check the following Turn the camera on Images are unclear1cm ~ 10cm Wide only Specifications127 Capacity 256MB MMC180 About the software Power Mac G3 or laterSoftware Notes System RequirementsSetting up the application software Install the Digimax Master in the order shown Starting PC mode Cut Connecting the camera to a PCDownloading stored images Connect the camera to your PC with the USB cableRemoving the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACUninstallation is complete Downloaded images will be displayed Digimax MasterImage viewer You can view the stored images FAQ System SettingsWhen the movie clip doesn’t play back on the PC CaseWastes at the end of its working life Correct Disposal of This ProductSamsung Techwin FCC notice6806-0143
Related manuals
Manual 82 pages 61.24 Kb Manual 82 pages 15.54 Kb Manual 82 pages 44.35 Kb Manual 82 pages 36.21 Kb Manual 82 pages 61.96 Kb Manual 82 pages 20.99 Kb Manual 82 pages 37.99 Kb Manual 82 pages 30.74 Kb