Samsung EC-NV7ZZBBB/FR, EC-NV7ZZBBC/DE manual Camera’s internal components and could cause a fire

Page 3

Danger

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Do not attempt to modify this camera in any way. To do so may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre.

Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion.

Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the camera, and then disconnect the power source. You must contact your dealer or Samsung Camera Service centre. Do not continue to use the camera as this may cause a fire or electric shock.

Do not insert or drop metallic or inflammable foreign objects into the camera through access points e.g. the memory card slot and battery chamber. This may cause a fire or electric shock.

Do not operate this camera with wet hands. This could pose a risk of electric shock.

Warning

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Do not use the flash in close proximity to people or animals. Positioning the flash too close to your subject’s eyes may cause eyesight damage.

For safety reasons keep this product and accessories out of reach of children or animals to prevent accidents e.g.:

Swallowing battery or small camera accessories. If an accident should occur, please consult a doctor immediately.

There is the possibility of injury from the camera’s moving parts.

Battery and camera may become hot during prolonged use and it may result in camera malfunction. Should this be the case, let the camera sit idle for a few minutes to allow it time to cool.

Do not leave this camera in places subject to extremely high temperatures, such as a sealed vehicle, direct sunlight or other places of extreme variances in temperature. Exposure to extreme temperatures may adversely affect the

camera’s internal components and could cause a fire.

When in use, do not cover the camera or Charger. This may cause heat to build up and distort the camera body or cause a fire. Always use the camera and its accessories in a well-ventilated area.

2

Image 3
Contents English Instructions Use this camera in the following orderThank you for buying a Samsung Digital Camera Camera’s internal components and could cause a fire Contents Dpof FAQUSB ISOSystem chart Identification of features Built-in flashLens/ Lens cover Zoom W button Thumbnail Zoom T button Digital zoom Bottom ASR mode Self-timer lamp Icon Status DescriptionTurns off when ready to take another picture ASM modeText Sunset Dawn Backlight Fireworks BEACH&SNOW Connecting to a Power SourceConnectinga to a Power Source Charging error Charging is completeCharging with the camera Charging LED Inserting the memory card Insert the battery as shownBattery Indicator Turn off the cameras power beforeFine Normal 30FPS 15FPSStill Riopla When Using the Camera for the First Time Smart button Selected menu Left / rightMenus will display Setting up the language Description Icons LCD monitor indicatorImage & Full Status Description Icons 000100/010000Select the A, S or M mode by using the smart button Starting the recording modeSelect the Aperture Priority mode By using the smart button Select the Manual mode by using the smart button. p.39Smart button. p.39 Point the camera towards the subject Fluorescent lighting condition, camera shake Activate If the lighting condition is darker thanPressing the shutter button down half way To record a movie clip without voiceShooting against the light Using the camera buttons to set the cameraButton will have no effect Zoom until the minimum setting is reachedZoom W / T button Subject will appear nearerMenu Using the LCD monitor to set the cameraEffect Colour toneFlash Fill Metering SpotBrightness You can change the brightness of the imageChanging the brightness Selecting focus type Flash Manual Focus MFAuto macro Size Multi Continuous shotMetering SingleSharpness White Save the image in negative modeEffect Quality / Frame rateSelf-timer / Remote control White balance Voice recording / Voice memoUsing the Custom White Balance Auto Exposure Lock AELBalance Shutter button Scene menu Exposure compensationSpecial Effect Photo Frame Special Effect Motion GIFPhoto frame is not inserted Selecting 2 composite shooting Special Effect Composite shootingShutter Speed Aperture Value This mode will set the aperture value for automatic exposurePress the Play mode button and menus as shown will display Photo Gallery modeAlbum mode Images play back by album Selecting a play back modePlaying back an album Press the slide show menu button Will display on the LCD and OPS function Rotating an imageRotates the image clockwise Rotates the image anticlockwise ImageStarting play mode File name No The movie trimming will cancel To stop playback of the voice, press the buttonVoice, press Button 100-0001 Description IconEnlarged view by checking the image Using the smart buttonPress the enlargement button Original full sized imageONE Play Starting the slide showALL Protecting imagesDeleting images ONEONE PIC CancelDpof Print size Dpof IndexResize Rotating an imageTrimming Motion GIFRange of yellowish brown colours Shown Connecting the Camera to a PrinterCustom Printing mode Easy Printing mode PictBridge100-0001 SettingPrinter button Setup menuLogo Main menu Sub menuMemory card Full Using the camera buttons except for the shutter buttonNew memory card is used, or after Name will be set from 0001 even afterThere is an option to include Date / Time on still images Off Date & Time will not be imprintedLanguage sub menu Sub menus Off The quick view function can’t be activated You can turn the Auto Focus lamp on and off Sub menusSub menus No The memory will not be formatted You can select the shutter soundShutter sound Off, Sound 1, Sound 2, Sound Sound sub menus Off, Sound 1, Sound 2, SoundCopied to the memory card after Movie output signal from the camera can be Ntsc or PALCancels Copy to Card YesNot sound Or AV channel of the TVImage may not display Indicated on the LCD monitorSand can be particularly troublesome to cameras Important notesImportant notes Before contacting a service centre Insert a fully charged battery p.13Please check the following Turn the camera on Images are unclear1cm ~ 10cm Wide only SpecificationsCapacity 256MB MMC 127180 About the software Power Mac G3 or laterSoftware Notes System RequirementsSetting up the application software Install the Digimax Master in the order shown Starting PC mode Cut Connecting the camera to a PCDownloading stored images Connect the camera to your PC with the USB cableRemoving the removable disk Setting up the USB Driver for MAC Using the USB Driver for MACUninstallation is complete Downloaded images will be displayed Digimax MasterImage viewer You can view the stored images FAQ System SettingsWhen the movie clip doesn’t play back on the PC CaseWastes at the end of its working life Correct Disposal of This ProductSamsung Techwin FCC notice6806-0143
Related manuals
Manual 82 pages 61.24 Kb Manual 82 pages 15.54 Kb Manual 82 pages 44.35 Kb Manual 82 pages 36.21 Kb Manual 82 pages 61.96 Kb Manual 82 pages 20.99 Kb Manual 82 pages 37.99 Kb Manual 82 pages 30.74 Kb