Samsung EC-NV7ZZBBJ/AS, EC-NV7ZZBBC/DE, EC-NV7ZZBBA/FR, EC-NV7ZZBBB/E2 Self-timer / Remote control

Page 34
OFF
10 sec
2 sec
DOUBLE

Self-timer / Remote control

This function is used when the photographer would also like to be in the picture. - Selecting a self-timer :

When you press the Shutter button, the picture will be taken after the specified time has elapsed and the self-timer function will be cancelled.

- Selecting a remote mode :

REMOTE

 

Remote control range

When you take a picture by using the remote control, refer to the illustrations shown alongside about the remote control range.

[Shutter button on the

remote control]

V

A

R

I

OP

Pressing the shutter button of a separate remote

control will allow an interval of 2 seconds before the image is taken. After taking a picture, the

remote mode will be maintained. But, pressing the Power button will cancel the remote mode.

Description of Self-timer / Remote mode

Icon

Mode

Description

 

 

 

 

Off

You do not use the self-timer function.

 

 

 

 

10s

Pressing the shutter button will allow an interval of

 

10 seconds before the image is taken.

 

 

 

 

 

 

2s

Pressing the shutter button will allow an interval of

 

2 seconds before the image is taken.

 

 

 

 

 

 

Double

A picture will be taken after about 10 seconds and

 

2 seconds later a second picture will be taken.

 

 

 

 

 

 

Remote

You can take a picture by remote control instead of using

 

the shutter button of the camera.

 

 

 

 

 

LAN

ZOO

M

6.3-44.7

Replacing battery for the remote control

Make sure the + (positive) polarity is toward the top and the - (negative) polarity is toward the bottom while installing battery for the remote control. Replace battery for the remote control in the local service centre. Use the CR 2025 3V battery.

INFORMATION

When taking a picture using the self-timer, the self-timer lamp works as follows : 2 second self-timer setting : The self-timer lamp blinks at 0.25 second

interval for 2 seconds.

10 second self-timer setting : The self-timer lamp blinks at 1 second interval for the first 7 seconds. It blinks at 0.25 second interval for the remaining 3 seconds.

If you operate the Play mode button during the self-timer operation, the self- timer function is canceled.

Use a tripod to prevent camera shake.

33

Image 34
Contents English Use this camera in the following order InstructionsThank you for buying a Samsung Digital Camera Camera’s internal components and could cause a fire Contents ISO FAQUSB DpofSystem chart Built-in flash Identification of featuresLens/ Lens cover Zoom W button Thumbnail Zoom T button Digital zoom Bottom ASM mode Self-timer lamp Icon Status DescriptionTurns off when ready to take another picture ASR modeConnecting to a Power Source Text Sunset Dawn Backlight Fireworks BEACH&SNOWConnectinga to a Power Source Charging is complete Charging errorCharging with the camera Charging LED Turn off the cameras power before Insert the battery as shownBattery Indicator Inserting the memory card30FPS 15FPS Fine NormalStill Riopla Selected menu Left / right When Using the Camera for the First Time Smart buttonMenus will display Setting up the language 000100/010000 LCD monitor indicatorImage & Full Status Description Icons Description IconsStarting the recording mode Select the A, S or M mode by using the smart buttonSelect the Manual mode by using the smart button. p.39 Select the Aperture Priority mode By using the smart buttonSmart button. p.39 Point the camera towards the subject Activate If the lighting condition is darker than Fluorescent lighting condition, camera shakeTo record a movie clip without voice Pressing the shutter button down half wayUsing the camera buttons to set the camera Shooting against the lightSubject will appear nearer Zoom until the minimum setting is reachedZoom W / T button Button will have no effectUsing the LCD monitor to set the camera MenuMetering Spot Colour toneFlash Fill EffectYou can change the brightness of the image BrightnessChanging the brightness Manual Focus MF Selecting focus type FlashAuto macro Size Single Continuous shotMetering MultiSharpness Quality / Frame rate Save the image in negative modeEffect WhiteSelf-timer / Remote control Voice recording / Voice memo White balanceAuto Exposure Lock AEL Using the Custom White BalanceBalance Shutter button Exposure compensation Scene menuSpecial Effect Motion GIF Special Effect Photo FramePhoto frame is not inserted Special Effect Composite shooting Selecting 2 composite shootingThis mode will set the aperture value for automatic exposure Shutter Speed Aperture ValueSelecting a play back mode Photo Gallery modeAlbum mode Images play back by album Press the Play mode button and menus as shown will displayPlaying back an album Press the slide show menu button Image Rotating an imageRotates the image clockwise Rotates the image anticlockwise Will display on the LCD and OPS functionStarting play mode To stop playback of the voice, press the button File name No The movie trimming will cancelVoice, press Button Description Icon 100-0001Original full sized image Using the smart buttonPress the enlargement button Enlarged view by checking the imageStarting the slide show ONE PlayONE Protecting imagesDeleting images ALLDpof Index CancelDpof Print size ONE PICRotating an image ResizeMotion GIF TrimmingRange of yellowish brown colours PictBridge Connecting the Camera to a PrinterCustom Printing mode Easy Printing mode ShownSetting 100-0001Setup menu Printer buttonMain menu Sub menu LogoName will be set from 0001 even after Using the camera buttons except for the shutter buttonNew memory card is used, or after Memory card FullOff Date & Time will not be imprinted There is an option to include Date / Time on still imagesLanguage sub menu You can turn the Auto Focus lamp on and off Sub menus Sub menus Off The quick view function can’t be activatedSound sub menus Off, Sound 1, Sound 2, Sound You can select the shutter soundShutter sound Off, Sound 1, Sound 2, Sound Sub menus No The memory will not be formattedYes Movie output signal from the camera can be Ntsc or PALCancels Copy to Card Copied to the memory card afterIndicated on the LCD monitor Or AV channel of the TVImage may not display Not soundImportant notes Sand can be particularly troublesome to camerasImportant notes Insert a fully charged battery p.13 Before contacting a service centrePlease check the following Images are unclear Turn the camera onSpecifications 1cm ~ 10cm Wide only127 Capacity 256MB MMC180 System Requirements Power Mac G3 or laterSoftware Notes About the softwareSetting up the application software Install the Digimax Master in the order shown Starting PC mode Connect the camera to your PC with the USB cable Connecting the camera to a PCDownloading stored images CutRemoving the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACUninstallation is complete Digimax Master Downloaded images will be displayedImage viewer You can view the stored images FAQ Case SettingsWhen the movie clip doesn’t play back on the PC SystemCorrect Disposal of This Product Wastes at the end of its working lifeFCC notice Samsung Techwin6806-0143
Related manuals
Manual 82 pages 61.24 Kb Manual 82 pages 15.54 Kb Manual 82 pages 44.35 Kb Manual 82 pages 36.21 Kb Manual 82 pages 61.96 Kb Manual 82 pages 20.99 Kb Manual 82 pages 37.99 Kb Manual 82 pages 30.74 Kb