Samsung EC-NV7ZZBBR/E1 manual Important notes, Sand can be particularly troublesome to cameras

Page 63

Important notes

Be sure to observe the following precautions!

This unit contains precision electronic components. Do not use or store this unit in the following locations.

-Areas exposed to severe changes in temperature and humidity.

-Areas exposed to dust and dirt.

-Areas exposed to direct sunlight or the inside of a vehicle in hot weather.

-Environments where there is high magnetism or excessive vibration.

-Areas with high explosives or highly flammable materials.

Do not leave this camera in places subject to dust, chemicals (like naphthalene and mothball), high temperatures or high humidity. Keep this camera with silica gel in a hermetically sealed box when not planning to use the camera for a long period of time.

Sand can be particularly troublesome to cameras.

-Do not let sand get inside the camera when using it on beaches, coastal dunes, or other areas where there is lots of sand.

-Doing so may result in failure or may render the camera permanently unusable.

Handling the camera

-Never drop the camera or subject it to severe shocks or vibrations.

-Protect the large size LCD monitor from an impact. When this camera is not used, keep it in the camera case.

-Avoid obstructing the lens or the flash when you capture an image.

-This camera is not waterproof.

To avoid dangerous electrical shocks, never hold or operate the camera with wet hands.

-If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit.

Extremes in temperature may cause problems.

-If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this seems likely, wait for at least 1 hour until all moisture is dispersed before attempting to use the camera.

Moisture built up can also occur on the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.

Caution on Using the Lens

-If the lens is subjected to direct sunlight, it could result in the discoloration and deterioration of the image sensor.

-Avoid getting fingerprints or foreign substances on the surface of the lens.

If the digital camera is not used for a long period, an electric discharge can occur.

It is a good idea to remove the battery and the memory card if you do not intend using the camera for an extended period of time.

If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card.

62

Image 63
Contents English Instructions Use this camera in the following orderThank you for buying a Samsung Digital Camera Camera’s internal components and could cause a fire Contents Dpof FAQUSB ISOSystem chart Identification of features Built-in flashLens/ Lens cover Zoom W button Thumbnail Zoom T button Digital zoom Bottom ASR mode Self-timer lamp Icon Status DescriptionTurns off when ready to take another picture ASM modeText Sunset Dawn Backlight Fireworks BEACH&SNOW Connecting to a Power SourceConnectinga to a Power Source Charging error Charging is completeCharging with the camera Charging LED Inserting the memory card Insert the battery as shownBattery Indicator Turn off the cameras power beforeFine Normal 30FPS 15FPSStill Riopla When Using the Camera for the First Time Smart button Selected menu Left / rightMenus will display Setting up the language Description Icons LCD monitor indicatorImage & Full Status Description Icons 000100/010000Select the A, S or M mode by using the smart button Starting the recording modeSelect the Aperture Priority mode By using the smart button Select the Manual mode by using the smart button. p.39Smart button. p.39 Point the camera towards the subject Fluorescent lighting condition, camera shake Activate If the lighting condition is darker thanPressing the shutter button down half way To record a movie clip without voiceShooting against the light Using the camera buttons to set the cameraButton will have no effect Zoom until the minimum setting is reachedZoom W / T button Subject will appear nearerMenu Using the LCD monitor to set the cameraEffect Colour toneFlash Fill Metering SpotBrightness You can change the brightness of the imageChanging the brightness Selecting focus type Flash Manual Focus MFAuto macro Size Multi Continuous shotMetering SingleSharpness White Save the image in negative modeEffect Quality / Frame rateSelf-timer / Remote control White balance Voice recording / Voice memoUsing the Custom White Balance Auto Exposure Lock AELBalance Shutter button Scene menu Exposure compensationSpecial Effect Photo Frame Special Effect Motion GIFPhoto frame is not inserted Selecting 2 composite shooting Special Effect Composite shootingShutter Speed Aperture Value This mode will set the aperture value for automatic exposurePress the Play mode button and menus as shown will display Photo Gallery modeAlbum mode Images play back by album Selecting a play back modePlaying back an album Press the slide show menu button Will display on the LCD and OPS function Rotating an imageRotates the image clockwise Rotates the image anticlockwise ImageStarting play mode File name No The movie trimming will cancel To stop playback of the voice, press the buttonVoice, press Button 100-0001 Description IconEnlarged view by checking the image Using the smart buttonPress the enlargement button Original full sized imageONE Play Starting the slide showALL Protecting imagesDeleting images ONEONE PIC CancelDpof Print size Dpof IndexResize Rotating an imageTrimming Motion GIFRange of yellowish brown colours Shown Connecting the Camera to a PrinterCustom Printing mode Easy Printing mode PictBridge100-0001 SettingPrinter button Setup menuLogo Main menu Sub menuMemory card Full Using the camera buttons except for the shutter buttonNew memory card is used, or after Name will be set from 0001 even afterThere is an option to include Date / Time on still images Off Date & Time will not be imprintedLanguage sub menu Sub menus Off The quick view function can’t be activated You can turn the Auto Focus lamp on and off Sub menusSub menus No The memory will not be formatted You can select the shutter soundShutter sound Off, Sound 1, Sound 2, Sound Sound sub menus Off, Sound 1, Sound 2, SoundCopied to the memory card after Movie output signal from the camera can be Ntsc or PALCancels Copy to Card YesNot sound Or AV channel of the TVImage may not display Indicated on the LCD monitorSand can be particularly troublesome to cameras Important notesImportant notes Before contacting a service centre Insert a fully charged battery p.13Please check the following Turn the camera on Images are unclear1cm ~ 10cm Wide only SpecificationsCapacity 256MB MMC 127180 About the software Power Mac G3 or laterSoftware Notes System RequirementsSetting up the application software Install the Digimax Master in the order shown Starting PC mode Cut Connecting the camera to a PCDownloading stored images Connect the camera to your PC with the USB cableRemoving the removable disk Setting up the USB Driver for MAC Using the USB Driver for MACUninstallation is complete Downloaded images will be displayed Digimax MasterImage viewer You can view the stored images FAQ System SettingsWhen the movie clip doesn’t play back on the PC CaseWastes at the end of its working life Correct Disposal of This ProductSamsung Techwin FCC notice6806-0143
Related manuals
Manual 82 pages 61.24 Kb Manual 82 pages 15.54 Kb Manual 82 pages 44.35 Kb Manual 82 pages 36.21 Kb Manual 82 pages 61.96 Kb Manual 82 pages 20.99 Kb Manual 82 pages 37.99 Kb Manual 82 pages 30.74 Kb