Samsung EC-NV7ZZBBE/E1 manual Movie output signal from the camera can be Ntsc or PAL, Yes

Page 61

Setup menu

[ Copy To Card ]

This enables you to copy image files, movie clips and voice recording files to the memory card.

[ Selecting Video out type ]

The Movie output signal from the camera can be NTSC or PAL.

Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.

[No]	: Cancels "Copy to Card".
[Yes]	: All images, movie clips and voice recording
	files saved in the internal memory are
	copied to the memory card after the
	[Processing!] message is displayed.

No		Format

Yes		Copy to Card

Video Out

USB

Reset

Exit:BACK

Connecting to an external monitor

Using the USB cable with Cradle (Optional) : Connect the camera and the cradle. Connect the cradle to an external monitor with the supplied AV cable.

Using the AV cable with the Camera :

NTSC		Format

PAL		Copy to Card

Video Out

USB

Reset

Exit:BACK

INFORMATION

When this menu is selected without inserting a memory card, you can select the [Copy To Card] menu but the menu can’t be run.

If there is not enough space available in the memory card to copy saved images in the internal memory (19MB), the [Copy To Card] command will copy only some of the images and display [Memory Full!] message. Then the system will return to the playback mode. Please be sure to delete any unnecessary files in the internal memory to free up space before inserting the memory card into the camera.

When you move the images that are stored in the internal memory to the memory card, the next number of file names will be created in the card to avoid duplication of the file name.

-When the [Reset] of the [File] setup menu is set : The copied file names start from after the last stored file name.

-When the [Series] of the [File] setup menu is set : The copied file names start from after the last captured file name. After completing [Copy To Card], the last stored image of the last copied folder is displayed on the LCD monitor.

Connect the camera to an external monitor with the supplied AV cable.

V

A

R

IOPLA

[Using the AV cable with Cradle]

Yellow - Video

White - sound

[Using the AV cable with Camera]

60

Image 61

Contents English Use this camera in the following order InstructionsThank you for buying a Samsung Digital Camera Camera’s internal components and could cause a fire Contents USB FAQISO DpofSystem chart Built-in flash Identification of featuresLens/ Lens cover Zoom W button Thumbnail Zoom T button Digital zoom Bottom Turns off when ready to take another picture Self-timer lamp Icon Status DescriptionASM mode ASR modeText Sunset Dawn Backlight Fireworks BEACH&SNOW Connecting to a Power SourceConnectinga to a Power Source Charging is complete Charging errorCharging with the camera Charging LED Battery Indicator Insert the battery as shownTurn off the cameras power before Inserting the memory card30FPS 15FPS Fine NormalStill Riopla Selected menu Left / right When Using the Camera for the First Time Smart buttonMenus will display Setting up the language Image & Full Status Description Icons LCD monitor indicator000100/010000 Description IconsSelect the A, S or M mode by using the smart button Starting the recording modeSelect the Manual mode by using the smart button. p.39 Select the Aperture Priority mode By using the smart buttonSmart button. p.39 Point the camera towards the subject Fluorescent lighting condition, camera shake Activate If the lighting condition is darker thanPressing the shutter button down half way To record a movie clip without voiceShooting against the light Using the camera buttons to set the cameraZoom W / T button Zoom until the minimum setting is reachedSubject will appear nearer Button will have no effectMenu Using the LCD monitor to set the cameraFlash Fill Colour toneMetering Spot EffectYou can change the brightness of the image BrightnessChanging the brightness Manual Focus MF Selecting focus type FlashAuto macro Size Metering Continuous shotSingle MultiSharpness Effect Save the image in negative modeQuality / Frame rate WhiteSelf-timer / Remote control White balance Voice recording / Voice memoAuto Exposure Lock AEL Using the Custom White BalanceBalance Shutter button Scene menu Exposure compensationSpecial Effect Motion GIF Special Effect Photo FramePhoto frame is not inserted Selecting 2 composite shooting Special Effect Composite shootingShutter Speed Aperture Value This mode will set the aperture value for automatic exposureAlbum mode Images play back by album Photo Gallery modeSelecting a play back mode Press the Play mode button and menus as shown will displayPlaying back an album Press the slide show menu button Rotates the image clockwise Rotates the image anticlockwise Rotating an imageImage Will display on the LCD and OPS functionStarting play mode To stop playback of the voice, press the button File name No The movie trimming will cancelVoice, press Button 100-0001 Description IconPress the enlargement button Using the smart buttonOriginal full sized image Enlarged view by checking the imageONE Play Starting the slide showDeleting images Protecting imagesONE ALLDpof Print size CancelDpof Index ONE PICResize Rotating an imageMotion GIF TrimmingRange of yellowish brown colours Custom Printing mode Easy Printing mode Connecting the Camera to a PrinterPictBridge Shown100-0001 SettingPrinter button Setup menuLogo Main menu Sub menuNew memory card is used, or after Using the camera buttons except for the shutter buttonName will be set from 0001 even after Memory card FullOff Date & Time will not be imprinted There is an option to include Date / Time on still imagesLanguage sub menu Sub menus Off The quick view function can’t be activated You can turn the Auto Focus lamp on and off Sub menusShutter sound Off, Sound 1, Sound 2, Sound You can select the shutter soundSound sub menus Off, Sound 1, Sound 2, Sound Sub menus No The memory will not be formattedCancels Copy to Card Movie output signal from the camera can be Ntsc or PALYes Copied to the memory card afterImage may not display Or AV channel of the TVIndicated on the LCD monitor Not soundSand can be particularly troublesome to cameras Important notesImportant notes Insert a fully charged battery p.13 Before contacting a service centrePlease check the following Turn the camera on Images are unclear1cm ~ 10cm Wide only Specifications127 Capacity 256MB MMC180 Software Notes Power Mac G3 or laterSystem Requirements About the softwareSetting up the application software Install the Digimax Master in the order shown Starting PC mode Downloading stored images Connecting the camera to a PCConnect the camera to your PC with the USB cable CutRemoving the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACUninstallation is complete Downloaded images will be displayed Digimax MasterImage viewer You can view the stored images FAQ When the movie clip doesn’t play back on the PC SettingsCase SystemWastes at the end of its working life Correct Disposal of This ProductSamsung Techwin FCC notice6806-0143

Related manuals

Manual 82 pages 61.24 Kb

Manual 82 pages 15.54 Kb

Manual 82 pages 44.35 Kb

Manual 82 pages 36.21 Kb

Manual 82 pages 61.96 Kb

Manual 82 pages 20.99 Kb

Manual 82 pages 37.99 Kb

Manual 82 pages 30.74 Kb