Samsung HT-J5550W/EN manual Wireless Network, Wpspbc

4. Select a parameter to enter (IP Address, for

example), and then press E. Use the number

Network Settings

keypad on your remote control to enter the

numbers for the parameter. You can also enter

numbers using the ▲▼ buttons. Use the ◄►

buttons on the remote control to move from

entry field to entry field within a parameter. When

done with one parameter, press the E button.

5. Press the ▲ or ▼ button to move to another

parameter, and then enter the numbers for that

Select your network type.

Network Type Wireless

Wireless network

si-ap

MIC

KIMING_VTOWER

You can connect your BD Home Theater to the internet. Please select which wireless network to use.

parameter following the instructions in Step 4.

6. Repeat Steps 4 and 5 until you have filled in all

parameters.

✎You can get the network parameter values from your Internet provider.

7.When finished entering all the parameter values, select Return ('), and then press the E button. The home cinema verifies the network connection and then connects to the network.

Wireless Network

You can set up a wireless network connection in three ways:

-Wireless Automatic

-Wireless Manual

-WPS(PBC)

Before you configure the wireless network connection, disconnect any wireless network devices currently connected to the product or, if applicable, the product's current wired connection.

Wireless - Automatic

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 22)

1.In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks.

WPS(PBC) Search

m Move " Select ' Return

2.Select the desired network, and then press the E button.

3.On the Security Key screen, enter your network's security code or pass phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◄► buttons, and then pressing E button.

4.When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network.

✎You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.

Wireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 22)

1.In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks.

2.Scroll through the list, select the desired network or Add Network, and then press the E button.

3.If you selected a network in Step 2, go to Step 6. If you selected Add Network, go to Step 4.

Settings

23 - English