Samsung HT-J5550W/EN manual Using the Bluetooth Quick start, TV Sound

Playing Content

-If the Bluetooth device is turned off, not in place, or malfunctions.

Note that such devices as microwave ovens, wireless LAN adapters, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, and can cause electric interference.

✎For the best operational compatibility between the home cinema and a Bluetooth device or any other device, such as a Mobile Phone, we recommend you update the device's OS to the latest version.

To Disconnect the Bluetooth Device from the

Home Cinema

You can disconnect the Bluetooth device from the Home Cinema. For instructions, refer to the Bluetooth device's manual.

~When the Home Cinema is disconnected from the Bluetooth device, the Home Cinema will display DISCONNECTED on the front display.

To Disconnect the Home Cinema from the

Bluetooth Device

Press the ( ) button on the front panel of the Home Cinema to switch from BT to another mode or turn off the Home Cinema.

~Except when you disconnect the Home Cinema by changing functions, the connected Bluetooth device will wait a certain amount of time for

a response from the Home Cinema before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device.)

✎In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Home Cinema System and the Bluetooth device exceeds 10 meters. When the Bluetooth device comes back into effective range or you restart the Bluetooth device, you will have to pair the device and home cinema again to reconnect.

✎In Bluetooth mode, the screen saver will start if the Bluetooth device stays in the Ready state for 5 minutes. To reconnect the Bluetooth device, turn off the screen saver, and then connect the device. To turn off the screen saver, press any button on the remote control (the Volume button, a number button, etc.)

Using the Bluetooth Quick start

When the home cinema is turned off, connecting your smart device to the product via a Bluetooth connection can turn the home cinema on.

✎The Quick start function is available when the home cinema's power cord is plugged into an AC wall outlet.

✎To use this function, set Settings > System > Quick start to On.

✎To use this function, the Bluetooth connection between the home cinema and your smart device should have been established before. In other words, the home cinema should be found on the list of Bluetooth devices your smart device has already connected to.

1.Connect your smart device to the product via Bluetooth. (For information on Bluetooth connections, refer to your smart device’s manual.)

2.Once connected, the home cinema will turn itself on automatically in BT mode.

~Select the desired music to play on your smart device.

Using the Special Effects Remote

Control Buttons

TV SOUND

TV SOUND

If you have a TV that supports Anynet+ (HDMI- CEC), the TV SOUND button lets you direct the TV's audio to the Home Cinema Speakers or the TV Speakers. To use this function, follow these steps:

1.Connect an HDMI cable to the TV and home cinema. (See page 13)

2.Set Anynet+ (HDMI-CEC) On in the home cinema and TV.

3.Press the TV SOUND button on the remote control. TV SOUND ON flashes on the display on the front panel, and then changes to D. IN.

~When TV SOUND is on, TV audio outputs through the Home Cinema speakers.

4.Press the TV SOUND button again to turn TV SOUND off.

~When TV SOUND is off, TV audio outputs through the speakers of the connected Anynet+ TV.

34 - English