![](/images/new-backgrounds/1155070/15507031x1.webp)
Reverse Side
――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
IR /AMBIENT
SENSOR IN
HDMI IN 3
HDMI IN 2
HDMI IN 1
DP IN 3
(UHD 30Hz)
DP IN 2
(UHD 60Hz)
DP IN 1
(UHD 60Hz)
DVI IN / | IR OUT | RS232C OUT RS232C IN |
MAGICINFO IN |
|
|
USB | RGB IN | AUDIO OUT |
|
| RGB / DVI / |
RJ45 |
| HDMI / |
|
| AUDIO IN |
Port | Description | |
|
| |
IR /AMBIENT SENSOR IN | Supplies power to the external sensor board or receives the light sensor signal. | |
|
| |
HDMI IN 1, HDMI IN 2, HDMI IN 3 | Connects to a source device using a HDMI cable or | |
|
| |
DP IN 3 (UHD 30Hz) | Connects to a PC using a DP cable. | |
| ――Obtain sharp picture quality when viewing UHD content at 30 Hz. | |
| ――The recommended resolution for the DP IN 3 (UHD 30Hz) port is 3840 x | |
| 2160 @ 30 Hz. The resolution can be changed to the optimal resolution of | |
| 3840 x 2160 @ 30 Hz, if required. | |
|
| |
DP IN 2 (UHD 60Hz) | Connects to a PC using a DP cable. | |
| ――Obtain sharp picture quality when viewing UHD content at 60 Hz. | |
DP IN 1 (UHD 60Hz) | ||
| ||
|
| |
DVI IN / MAGICINFO IN | DVI IN: Connects to a source device using a DVI cable or | |
| MAGICINFO IN: To use MagicInfo, make sure to connect the | |
|
| |
RJ45 | Connects to MDC using a LAN cable. | |
| ――Use Cat7(*STP Type) cable for the connection. | |
| *Shielded Twist Pair. | |
|
| |
IR OUT | Receives the remote control signal via the external sensor board and outputs the signal | |
| via LOOP OUT. | |
|
| |
RS232C OUT | Connects to MDC using an RS232C adapter. | |
|
| |
RS232C IN |
| |
|
| |
USB | Connects to a USB device when upgrading software. | |
|
| |
RGB IN | Connects to a source device using a | |
|
| |
AUDIO OUT | Outputs sound to an audio device via an audio cable. | |
|
| |
RGB / DVI / HDMI / AUDIO IN | Receives sound from a source device via an audio cable. | |
|
|
16